## automake - create Makefile.in from Makefile.am
## Copyright (C) 2001, 2002, 2003  Free Software Foundation, Inc.

## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2, or (at your option)
## any later version.

## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.

## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
## 02111-1307, USA.

## DIST_COMMON comes first so that README can be the very first file.
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = %TOP_DISTDIR%
if %?TOPDIR_P%
## Avoid unsightly `./'.
?DISTDIR?distdir = $(PACKAGE)-$(VERSION)
else !%?TOPDIR_P%
?DISTDIR?distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
endif !%?TOPDIR_P%

if %?TOPDIR_P%
am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }
endif %?TOPDIR_P%

.PHONY: distdir
distdir: $(DISTFILES)
##
## For Gnits users, this is pretty handy.  Look at 15 lines
## in case some explanatory text is desirable.
##
if %?TOPDIR_P%
if  %?CK-NEWS%
	@case `sed 15q $(srcdir)/NEWS` in \
	*"$(VERSION)"*) : ;; \
	*) \
	  echo "NEWS not updated; not releasing" 1>&2; \
	  exit 1;; \
	esac
endif  %?CK-NEWS%
endif %?TOPDIR_P%
##
## Only for the top dir.
##
if %?TOPDIR_P%
	$(am__remove_distdir)
	mkdir $(distdir)
endif %?TOPDIR_P%
##
##
?DISTDIRS?	$(mkinstalldirs) %DISTDIRS%
##
##
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
##
## Yet another hack to support SUN make.
##
## Let's assume `foo' appears in DISTFILES and is not a built file.
## When building with VPATH=$(srcdir), SUN make will rewrite `foo' as
## `$(srcdir)/foo'.  An attempt to install the file with
##    cp $file $(distdir)/$file
## will thus install $(srcdir)/foo as $(distdir)/$(srcdir)/foo
## instead of $(distdir)/foo.
##
## So let's strip this leading $(srcdir)/ when it exists.  (As far we
## know, only SUN make adds it.)  Searching whether the file is to be
## found in the source or build directory will be done latter.
##
## In case we are _not_ using SUN make, how can we be sure we are
## not stripping a legitimate filename that starts with the same
## pattern as $(srcdir)?
## Well, it can't happen without the Makefile author distributing
## something out of the distribution (which is bad).   As an example,
## consider `EXTRA_DIST = ../bar'.  This is an issue if $srcdir is `..',
## however getting this value for srcdir is impossible: `EXTRA_DIST = ../bar'
## implies we are in a subdirectory (so `../bar' is within the package),
## hence `$srcdir' is something like `../../subdir'.
##
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
## Also rewrite $(top_srcdir) (which sometimes appears in DISTFILES, and can
## be absolute) by $(top_builddir) (which is always relative).  $(srcdir) will
## be prepended latter.
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
##
## Always look for the file in the build directory first.  That way
## for something like yacc output we will correctly pick up the latest
## version.  Also check for directories in the build directory first,
## so one can ship generated directories.
##
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
##
## Make the subdirectory for the file.  This is going to make `dist'
## really crawl, but it seems like the only way to do it, given that
## files in subdirectories can be specified for `dist' conditionally.
##
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkinstalldirs) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
##
## Use cp, not ln.  There are situations in which "ln" can fail.  For
## instance a file to distribute could actually be a cross-filesystem
## symlink -- this can easily happen if "gettextize" was run on the
## distribution.
##
	  if test -d $$d/$$file; then \
## Don't mention $$file in destination argument, since this fails if
## destination directory already exists.  Also, use `-R' and not `-r'.
## `-r' is almost always incorrect.
##
## If a directory exists both in `.' and $(srcdir), then
## We copy the files from $(srcdir) first and then install those from
## `.'.  This can help people who distribute directories made of
## source files _and_ generated files.  It is also important when the
## directory exists only in $(srcdir), because some vendor Make (such
## as Tru64) will magically create an empty directory in `.'
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
## Test for file existence because sometimes a file gets included in
## DISTFILES twice.  For example this happens when a single source
## file is used in building more than one program.
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
##
## Test for directory existence here because previous automake
## invocation might have created some directories.  Note that we
## explicitly set distdir for the subdir make; that lets us mix-n-match
## many automake-using packages into one large package, and have "dist"
## at the top level do the right thing.  If we're in the topmost
## directory, then we use `distdir' instead of `top_distdir'; this lets
## us work correctly with an enclosing package.
##
if %?SUBDIRS%
	list='$(%DIST_SUBDIR_NAME%)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$(top_distdir)" \
	        distdir=../$(distdir)/$$subdir \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
endif %?SUBDIRS%
##
## We might have to perform some last second updates, such as updating
## info files.
## We must explicitly set distdir and top_distdir for these sub-makes.
##
if %?DIST-TARGETS%
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  %DIST-TARGETS%
endif %?DIST-TARGETS%
##
## This complex find command will try to avoid changing the modes of
## links into the source tree, in case they're hard-linked.  It will
## also make directories writable by everybody, because some
## brain-dead tar implementations change ownership and permissions of
## a directory before extracting the files, thus becoming unable to
## extract them.
##
## Ignore return result from chmod, because it might give an error
## if we chmod a symlink.
##
## Another nastiness: if the file is unreadable by us, we make it
## readable regardless of the number of links to it.  This only
## happens in perverse cases.
##
## We use $(install_sh) because that is a known-portable way to modify
## the file in place in the source tree.
##
if %?TOPDIR_P%
	-find $(distdir) -type d ! -perm -755 -exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
endif %?TOPDIR_P%




## --------------------------------------- ##
## Building various distribution flavors.  ##
## --------------------------------------- ##

## Note that we don't use GNU tar's `-z' option.  One reason (but not
## the only reason) is that some versions of tar (e.g., OSF1)
## interpret `-z' differently.

if %?TOPDIR_P%

GZIP_ENV = --best
.PHONY: dist-gzip
dist-gzip: distdir
	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)

if  %?BZIP2%
.PHONY: dist-bzip2
dist-bzip2: distdir
	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)
endif  %?BZIP2%


if  %?COMPRESS%
.PHONY: dist-tarZ
dist-tarZ: distdir
	$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)
endif  %?COMPRESS%


if  %?SHAR%
.PHONY: dist-shar
dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)
endif  %?SHAR%


if  %?ZIP%
.PHONY: dist-zip
dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)
endif  %?ZIP%

endif %?TOPDIR_P%



## ------------------------------------------------- ##
## Building all the requested distribution flavors.  ##
## ------------------------------------------------- ##

## Currently we cannot use if/endif inside a rule.  The file_contents
## parser needs work.

if %?TOPDIR_P%

.PHONY: dist dist-all
dist dist-all: distdir
	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
?BZIP2?	$(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
?COMPRESS?	$(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
?SHAR?	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
?ZIP?	-rm -f $(distdir).zip
?ZIP?	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

endif %?TOPDIR_P%


## ------------------------- ##
## Checking a distribution.  ##
## ------------------------- ##


if %?TOPDIR_P%
# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
.PHONY: distcheck
distcheck: dist
	$(am__remove_distdir)
	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
## Make the new source tree read-only.  Distributions ought to work in
## this case.  However, make the top-level directory writable so we
## can make our new subdirs.
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
## Undo the write access.
	chmod a-w $(distdir)
## Compute the absolute path of `_inst'.  Strip any leading DOS drive
## to allow DESTDIR installations.  Otherwise $(DESTDIR)$(prefix) would
## expand to c:/temp/am-dc-5668/c:/src/package/package-1.0/_inst.
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
## We will attemp a DESTDIR install in $dc_destdir.  We don't
## create this directory under $dc_install_base, because it would
## create very long directory names.
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
?DISTCHECK-HOOK?	  && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \
	  && cd $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
?GETTEXT?	    --with-included-gettext \
## Additional flags for configure.  Keep this last in the configure
## invocation so the user can override previous options.
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
## Make sure the package has proper DESTDIR support (we could not test this
## in the previous install/installcheck/uninstall test, because it's reasonable
## for installcheck to fail in a DESTDIR install).
## We make the `$dc_install_base' read-only because this is where files
## with missing DESTDIR support are likely to be installed.
	  && chmod -R a-w "$$dc_install_base" \
## The logic here is quite convoluted because we must clean $dc_destdir
## whatever happens (it won't be erased by the next run of distcheck like
## $(distdir) is).
	  && ({ \
## Build the directory, so we can cd into it even if `make install'
## didn't create it.
	       (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
## Make sure to remove the dist file we created in the test build
## directory.
	  && rm -f $(distdir).tar.gz \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@echo "$(distdir).tar.gz is ready for distribution" | \
	  sed 'h;s/./=/g;p;x;p;x'

## Define distuninstallcheck_listfiles and distuninstallcheck separately
## from distcheck, so that they can be overridden by the user.
.PHONY: distuninstallcheck
distuninstallcheck_listfiles = find . -type f -print
distuninstallcheck:
## We use -le 1 because the `dir' file (created by install-info)
## might still exist after uninstall.
	@cd $(distuninstallcheck_dir) \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2

## Define distcleancheck_listfiles and distcleancheck separately
## from distcheck, so that they can be overridden by the user.
.PHONY: distcleancheck
distcleancheck_listfiles = find . -type f -print
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
endif %?TOPDIR_P%