|
Server : Apache/2.2.17 (Unix) mod_ssl/2.2.17 OpenSSL/0.9.8e-fips-rhel5 DAV/2 PHP/5.2.17 System : Linux localhost 2.6.18-419.el5 #1 SMP Fri Feb 24 22:47:42 UTC 2017 x86_64 User : nobody ( 99) PHP Version : 5.2.17 Disable Function : NONE Directory : /proc/21585/root/usr/share/doc/ccid-1.3.8/ |
Upload File : |
2008-06-26 Ludovic Rousseau
* [r3027] src/ccid_usb.c: InterruptRead(): remove a \n in a log
* [r3026] src/ccid_usb.c: InterruptRead(): use a 2 seconds timeout
since it is not possible for
pcscd to kill the polling thread.
See thread on libusb-devel
http://sourceforge.net/mailarchive/forum.php?thread_name=baabf6440805290726s228bce20r5073d55d8d56241b%40mail.gmail.com&forum_name=libusb-devel
* [r3025] src/ifdhandler.c: IFDHPolling(): log only if
DEBUG_LEVEL_PERIODIC is set
* [r3024] src/Info.plist.src, src/Makefile.am, src/ifdhandler.c: do
not include the release number in the Info.plist to avoid a diff
of a
configuration file when upgrading the package.
Thanks to Benoit Gonzalvo for the bug report
2008-06-25 Ludovic Rousseau
* [r3023] README, readers/supported_readers.txt: add "Oberthur
ID-One Cosmo Card" in the "Should work but untested by me"
list
* [r3022] readers/Makefile.am, readers/Oberthur-CosmoCard.txt: add
Oberthur-CosmoCard.txt
2008-06-18 Ludovic Rousseau
* [r3010] readers/KAAN_Advanced.txt: firmware 1.19
* [r3009] readers/KAAN_Base.txt: firmware 1.19
2008-06-17 Ludovic Rousseau
* [r3008] readers/Kobil_EMV_CAP.txt: firmware 0.30
* [r3007] readers/KAAN_Advanced.txt: regenerate
* [r3006] src/defs.h: typo in comments
* [r3005] src/defs.h: Kobil readers does not support APDU chaining
for T=1 so you can't send
an extended APDU. The readers supports a command of up to 512 or
420
bytes.
2008-06-16 Ludovic Rousseau
* [r3004] src/commands.c: CCID_Receive(): do not crash if the
reader firmware is bogus and does
not support chaining for extended APDU.
This is the case for Kobil readers
2008-06-14 Ludovic Rousseau
* [r3002] configure.in: ask to install libusb if usb.h is not found
* [r3001] INSTALL: update the "building serial reader driver"
sections
* [r3000] contrib/Makefile.am: build Kobil_mIDentity_switch only if
WITH_LIBUSB is true
* [r2999] src/Makefile.am: build parse and libccid.la only if
WITH_LIBUSB is true
* [r2998] configure.in: define the conditional WITH_LIBUSB if
libusb is used
* [r2997] reconf: remove useless copy if m4.m4
* [r2996] configure.in: do not AC_MSG_RESULT([no]) if PCSC is not
found since
PKG_CHECK_MODULES() will already display the result
* [r2995] configure.in: set use_usb_interrupt=no by default
2008-06-09 Ludovic Rousseau
* [r2988] Makefile.am: rename aclocal to m4
* [r2987] Makefile.am, aclocal, configure.in, m4, reconf: rename
aclocal to m4
2008-06-08 Ludovic Rousseau
* [r2985] README, configure.in: release 1.3.7
* [r2984] README, readers/supported_readers.txt: add Pro-Active
CSB6 Ultimate in "should work" list
* [r2983] src/ccid_serial.c: ReadSerial(): return the length of
data read in *length
Thanks to Alexander Georg for the bug report
2008-06-07 Ludovic Rousseau
* [r2982] aclocal/acx_pthread.m4: add the file as a symlink to
../../../PCSC/m4/acx_pthread.m4
* [r2981] aclocal/acx_pthread.m4: remove file
* [r2976] aclocal/acx_pthread.m4: update (correct a problem under
Solaris)
Thanks to David L. Markowitz for the bug report
2008-05-28 Ludovic Rousseau
* [r2974] MacOSX/configure, README,
contrib/RSA_SecurID/RSA_SecurID_getpasswd.c,
examples/scardcontrol.c, src/ccid.c, src/ccid.h,
src/ccid_ifdhandler.h, src/ccid_serial.c, src/ccid_serial.h,
src/ccid_usb.c, src/ccid_usb.h, src/commands.c, src/commands.h,
src/convert_version.pl, src/create_Info_plist.pl, src/debug.c,
src/debug.h, src/defs.h, src/ifdhandler.c, src/openct/checksum.h,
src/openct/proto-t1.h, src/parse.c, src/towitoko/COPYING,
src/towitoko/atr.c, src/towitoko/atr.h, src/towitoko/defines.h,
src/towitoko/pps.c, src/towitoko/pps.h, src/utils.c, src/utils.h:
update Free Software Foundation mail address
* [r2973] contrib/Kobil_mIDentity_switch/Kobil_mIDentity_switch.c:
change the licence from GPL-v2 to LGPL-v2.1 after request from
Norbert
Federa
* [r2972] README, readers/supported_readers.txt: add id3
Semiconductors CL1356A HID in the should work list
* [r2971] readers/Makefile.am: add id3_CL1356D.txt
* [r2970] readers/Makefile.am, readers/id3_CL1356A_HID.txt: add
id3_CL1356A_HID.txt
2008-05-27 Ludovic Rousseau
* [r2969] readers/CardMan5321.txt: regenerate
2008-05-23 Ludovic Rousseau
* [r2968] README: update RSA SecureID SID800 web page
2008-05-22 Ludovic Rousseau
* [r2966] src/parse.c: libusb-compat returns a permission denied
error on usb_open() when not
run as root
* [r2965] configure.in: check if libusb-0.1 is emulated by
libusb-compat + libusb-1.0 to use or
not the USB interrupt feature
libusb-0.1 may never solve the performance problem of
usb_interrupt_read()
* [r2964] readers/GemCoreSIMPro.txt: update
2008-05-11 Ludovic Rousseau
* [r2941] Makefile.am: add AUTOMAKE_OPTIONS = dist-bzip2 so that
make dist alsa generates a
.tar.bz2 archive
2008-05-09 Ludovic Rousseau
* [r2937] readers/Makefile.am,
readers/Pro-Active_CSB6_Ultimate.txt: add
Pro-Active_CSB6_Ultimate.txt
* [r2936] src/parse.c: do not try to parse devices with
bInterfaceClass=0xFF by default (use
command line argument -p for proprietary class)
* [r2935] src/parse.c: remove duplicated code
2008-05-08 Ludovic Rousseau
* [r2934] README: use a real space character
* [r2933] README: use a real space character
* [r2932] README: sync with the ccid.html web page
* [r2931] README: rename Gemplus in Gemalto
* [r2930] README: reorder Eutron CryptoIdentity
* [r2929] README: add ActivCard Activkey Sim
2008-04-30 Ludovic Rousseau
* [r2924] README, configure.in: release 1.3.6
* [r2923] README: add URL for Validy USB Token
* [r2922] examples/scardcontrol.c: exit if no card is present
* [r2921] README, readers/supported_readers.txt: add Covadis Véga
in "Should work but untested by me" list
* [r2920] readers/Vega-Alpha.txt: regenerate
* [r2919] configure.in, src/convert_version.pl,
src/create_Info_plist.pl: add support for DragonFly BSD
Thanks to Hasso Tepper for the patch (alioth #310748)
2008-04-29 Ludovic Rousseau
* [r2916] src/openct/proto-t1.c: t1_transceive(): correctly reply
to S(ABORT request) with a S(ABORT
response) instead of a S(RESYNC request)
Thanks to Alon Bar-Lev for the bug report
2008-04-25 Ludovic Rousseau
* [r2912] Makefile.am: add "ACLOCAL_AMFLAGS = -I aclocal" so that
"autoreconf --install
--verbose --force" works after a clean svn checkout
Thanks to Alon Bar-Lev for the patch
* [r2911] src/ifdhandler.c: init_driver(): use the environment
variable LIBCCID_ifdLogLevel to
overwrite the value of ifdLogLevel read from the Info.plist file
Thanks to Alon Bar-Lev for the idea
2008-04-09 Ludovic Rousseau
* [r2876] readers/KEBTechnology_KONA_USB_SmartCard.txt,
readers/Makefile.am: add KEBTechnology_KONA_USB_SmartCard.txt
* [r2875] README, readers/supported_readers.txt: add the Validy
TokenA sl vt in the should work list
* [r2874] readers/Makefile.am, readers/Validy_TokenA.txt: add
Validy_TokenA.txt
* [r2873] README, readers/supported_readers.txt: Add Vasco DP905 in
the should work list
2008-04-08 Ludovic Rousseau
* [r2872] src/parse.c: display the enumerated USB devices and if
they are or not a CCID/ICCD
device
also add some colors
* [r2871] src/ccid.h, src/ccid_serial.c, src/ccid_usb.c,
src/ifdhandler.c: Simulate card absence for the GemCore SIM Pro
* [r2870] INSTALL: improve a bit the serial reader section
* [r2869] README: add Voltage selection section
2008-03-31 Ludovic Rousseau
* [r2864] src/Makefile.am: use $(bundle) instead of the hardcoded
ifd-ccid.bundle for CCID_BUNDLE
2008-03-29 Ludovic Rousseau
* [r2863] readers/Makefile.am, readers/Vasco_DP905.txt: add Vasci
DP905
* [r2862] src/parse.c: log error messages on stderr instead of
stdout
* [r2861] src/parse.c: use an unsigned char [] buffer only for
multi-bytes conversions.
usb_* functions want a char [] buffer.
* [r2860] src/utils.c, src/utils.h: use int instead of DWORD for
GetNewReaderIndex() and LunToReaderIndex()
Lun parameter
utils.c:48: warning: comparison between signed and unsigned
utils.c:73: warning: comparison between signed and unsigned
* [r2859] src/ccid_usb.c: ccid_check_firmware(): use unsigned int
instead of int
ccid_usb.c:720: warning: comparison between signed and unsigned
* [r2858] src/ccid_serial.c: WriteSerial(): use unsigned int
instead of int
ccid_serial.c:199: warning: comparison between signed and
unsigned
* [r2857] src/ifdhandler.c: use defined(USE_USB_INTERRUPT) instead
of just USE_USB_INTERRUPT
ifdhandler.c:60:66: warning: "USE_USB_INTERRUPT" is not defined
* [r2856] readers/supported_readers.txt: move the Blutronics and
Covadis reader before the Bogus readers
2008-03-25 Ludovic Rousseau
* [r2855] readers/Makefile.am, readers/Precise_250_MC.txt: add
Precise Biometrics 250 MC
2008-03-24 Ludovic Rousseau
* [r2854] src/ifdhandler.c: IFDHSetProtocolParameters(): store the
protocol used in
ccid_desc->cardProtocol even if the reader has
CCID_CLASS_AUTO_PPS_PROP.
Correct a potential bug in SecurePINVerify()/SecurePINModify().
Thanks to Jim Dawson for the bug report
2008-03-14 Ludovic Rousseau
* [r2849] src/ifdhandler.c: IFDHSetProtocolParameters(): O2Micro
OZ776 does not support a protocol
change to T=1 for dual protocol cards
https://www.opensc-project.org/opensc/ticket/172
https://bugs.launchpad.net/ubuntu/+bug/163072
2008-03-07 Ludovic Rousseau
* [r2848] README: add Covadis Alya in the supported list
* [r2847] readers/supported_readers.txt: add Covadis Alya
* [r2846] readers/Alya.txt: update
2008-02-27 Ludovic Rousseau
* [r2844] readers/Alya.txt, readers/Makefile.am,
readers/Vega-Alpha.txt: add Covadis.ch Alya and Vega-Alpha
readers
2008-02-22 Ludovic Rousseau
* [r2842] README, configure.in: release 1.3.5
* [r2841] contrib/Kobil_mIDentity_switch/Kobil_mIDentity_switch.c:
add "Try to rerun this program as root." if no device is found
and euid != 0
* [r2840] README: add Advanced Card Systems ACR122 in "Should work"
list
2008-02-21 Ludovic Rousseau
* [r2837] readers/ACR122U.txt, readers/Makefile.am: add ACR122U.txt
2008-02-20 Ludovic Rousseau
* [r2836] contrib/Kobil_mIDentity_switch/Kobil_mIDentity_switch.c:
#include "config.h" to have HAVE_USB_DETACH_KERNEL_DRIVER_NP
2008-02-16 Ludovic Rousseau
* [r2832] README: update SCM Micro URLs
* [r2831] README: rename the duplicate [31] reference as [31b]
2008-02-15 Ludovic Rousseau
* [r2827] configure.in: typo
* [r2826] configure.in: use $PKG_CONFIG instead of pkg-config
* [r2825] configure.in, src/ifdhandler.c: use usb_interrupt_read()
only if libusb > 0.1.12 or
--enable-usb-interrupt is used
2008-02-14 Ludovic Rousseau
* [r2824] src/Makefile.am: add MAINTAINERCLEANFILES = tokenparser.c
so that make distcheck works
* [r2822] README: add Cherry SmartBoard, G83-6610 in the "Should
work but untested by me"
list
* [r2821] readers/supported_readers.txt: add Cherry SmartBoard XX1X
* [r2820] readers/CherrySmartBoardXX1X.txt, readers/Makefile.am:
add CherrySmartBoardXX1X.txt
* [r2819] README: add Gemplus Gem e-Seal Pro in the "Should work
but untested by me" list
* [r2818] readers/supported_readers.txt: add Gemplus Gem e-Seal Pro
* [r2815] c.sh: linked to ../../PCSC/c.sh
* [r2813] readers/Gem_e-SealPro.txt, readers/Makefile.am: add
Gem_e-SealPro.txt
2008-02-08 Ludovic Rousseau
* [r2810] src/ifdhandler.c: IFDHPolling() and IFDHPolling() are
defined if TWIN_SERIAL is not
defined and also if HAVE_DECL_TAG_IFD_POLLING_THREAD is set to 1
* [r2809] README, configure.in: release 1.3.4
* [r2808] src/ccid.c: ccid_open_hack(): do not call InterruptRead
when compiling the serial driver
since this function is not defined in that case
* [r2807] README: Bluetronics -> Blutronics
2008-02-07 Ludovic Rousseau
* [r2806] src/ifdhandler.c: do not declare IFDHPolling() and
IFDHSleep() when building for the
serial reader
* [r2805] src/ccid_serial.h: use #ifndef to avoid multiple include
of the file
* [r2804] src/ccid.c: #include "ccid_usb.h" to get the declaration
of InterruptRead()
* [r2803] src/pcscd_ccid.rules: remove
WAIT_FOR_SYSFS="bInterfaceProtocol" to do not delay udev
Thanks to Alon Bar-Lev for the patch
* [r2802] src/ccid_usb.c: InterruptRead(): in case of timeout we
can also get EAGAIN (Resource
temporarily unavailable)
* [r2801] src/ifdhandler.c: IFDHSleep(): add a log call
2008-02-06 Ludovic Rousseau
* [r2799] configure.in: release 1.3.3
* [r2798] build/ylwrap: new version
* [r2796] README: release 1.3.3
* [r2795] src/pcscd_ccid.rules: remove the sleep since it causes
more problems than solutions
the sleep occured for any USB device connection.
* [r2794] README, readers/supported_readers.txt: add Blutronics
Bludrive II CCID in supported list
* [r2793] src/ccid.h, src/ccid_usb.c: add support for Bludrive II
CCID
* [r2792] readers/BludriveII.txt, readers/Makefile.am: add Bludrive
II CCID
* [r2791] src/parse.c: bInterfaceProtocol set to 0 is CCID
2008-02-05 Ludovic Rousseau
* [r2790] README: add Lexar/Gemalto Smart Enterprise Guardian in
the "Should work but
untested by me" list
2008-02-04 Ludovic Rousseau
* [r2789] src/commands.c: CCID_Receive(): the receive buffer must
be 4 bytes minimum for ICCD-B
Thanks to Martin Rauch for the bug report
* [r2788] src/ifdhandler.c: on an ICCD device the card is always
inserted so no card movement will
ever happen: just do nothing in the TAG_IFD_POLLING_THREAD thread
* [r2786] configure.in: improve configuration display
2008-02-02 Ludovic Rousseau
* [r2783] src/ifdhandler.c: HAVE_DECL_TAG_IFD_POLLING_THREAD is
always defined but is set to 0 or 1
2008-02-01 Ludovic Rousseau
* [r2782] readers/supported_readers.txt, src/ccid.c, src/ccid.h:
add support of Smart Enterprise Guardian
* [r2781] src/ifdhandler.c: add a prototype for IFDHPolling()
* [r2777] src/ifdhandler.c: add support of TAG_IFD_POLLING_THREAD
using IFDHPolling() to detect
asynchronous card movements
* [r2776] src/ccid_usb.c, src/ccid_usb.h: add InterruptRead() to
read the interrupt pipe use by asynchronous card
movements
2008-01-29 Ludovic Rousseau
* [r2774] src/ccid_usb.c: add comments
* [r2773] configure.in: check for TAG_IFD_POLLING_THREAD in
ifdhandler.h
* [r2772] src/ccid_usb.c: add interrupt end point field in
_usbDevice structure
* [r2771] src/ccid.h, src/ccid_usb.c: add bNumEndpoints field in
_ccid_descriptor structure
2008-01-24 Ludovic Rousseau
* [r2763] src/ccid_usb.c: ReadUSB(): return an error if we get more
than 10 duplicate frames error
in one read. Avoids an infinite loop with some buggy readers.
* [r2762] src/commands.c: CCID_Receive(): return an error if we
have read less (or more) data than
the CCID frame says to contain
2008-01-22 Ludovic Rousseau
* [r2757] configure.in: version 1.3.2
* [r2755] README: release 1.3.2
* [r2754] src/ccid_usb.c, src/ifdhandler.c: add support for Mac OS
X Leopard (10.5.1)
* [r2753] Makefile.am: distribute build files for Mac OS X Leopard
* [r2752] MacOSX, MacOSX/configure, MacOSX/convert_reader_h.pl,
MacOSX/debuglog.h, MacOSX/ifdhandler.h, MacOSX/pcsclite.h,
MacOSX/reader.h.in, MacOSX/winscard.h, MacOSX/wintypes.h: build
infrastructure for Apple Mac OS X Leopard
* [r2751] readers/GemCoreSIMPro.txt: do not duplicate the
description for each slot
2008-01-18 Ludovic Rousseau
* [r2746] Makefile.am, bootstrap: add and use bootstrap instead of
reconf. reconf does not work on Leopard
2008-01-14 Ludovic Rousseau
* [r2734] readers/supported_readers.txt: do not use a & (as in
"G&D") since Leopard cannot parse it as valid XML
2008-01-08 Ludovic Rousseau
* [r2725] src/pcscd_ccid.rules: correct comment on sleep: 1s
instead of 100ms
* [r2724] src/commands.c: CCID_Receive(): do not declare a
_ccid_descriptor variable for the twin
serial (warning: unused variable 'ccid_descriptor')
2008-01-07 Ludovic Rousseau
* [r2723] src/commands.c: do not add support for ICCD A or B for
the serial driver since
ControlUSB() is not available with this reader
* [r2722] Makefile.am: put src as the lastd directory to have the
udev message on screen when
installing
2007-12-31 Ludovic Rousseau
* [r2717] src/Makefile.am: force the libccidtwin.so symlink
creation to update a previously
existing file
* [r2716] src/Makefile.am: do not include the VERSION number in the
created reader.conf file
* [r2715] src/Makefile.am: create a symlink from libccidtwin.so to
libccidtwin.so.VERSION so that
the /etc/reader.conf configuration file do not need to edited for
each
new driver version
Closes Debian bug #457657
2007-12-11 Ludovic Rousseau
* [r2713] src/pcscd_ccid.rules: increase sleep delay from 0.1 to 1
second
2007-12-10 Ludovic Rousseau
* [r2712] src/pcscd_ccid.rules: wait until the field
bInterfaceProtocol is created. Should solve the
hotplug problem on Ubuntu 7.10
Thanks to OpenCT for the code
2007-11-23 Ludovic Rousseau
* [r2711] readers/GemaltoSmartEnterpriseGuardian.txt,
readers/Makefile.am: add Gemalto Smart Enterprise Guardian Secure
USB Device
2007-11-16 Ludovic Rousseau
* [r2699] README: update Reiner-SCT cyberJack pinpad(a) bug
description
* [r2698] README: Reiner-SCT cyberJack pinpad(a) bug is "just" a
non-management of time
requests
* [r2697] src/ccid_usb.c: remove Reiner-SCT cyberJack pinpad(a)
from bogus firmware list since yhe
bug is just a missing management of time requests
* [r2693] README: update Reiner-SCT bug: only case 1 APDU do not
work
* [r2692] README, configure.in: release 1.3.1
* [r2691] src/ccid_usb.c: move the readers without a correct
firmware together at the end of the
list of bogus firmwares
* [r2690] src/ccid_usb.c: add Reiner-SCT cyberJack pinpad(a) in the
list of bogus firmwares
* [r2689] README: use the complete name for "Reiner-SCT cyberJack
pinpad(a)"
* [r2688] readers/supported_readers.txt: add Reiner-SCT cyberJack
pinpad(a) in the bogus section
* [r2687] readers/supported_readers.txt: create a section "Bogus
readers but partly supported" and move the C3PO
LTC31 (old model) and ActivCard USB Reader 2.0 in this section
2007-11-15 Ludovic Rousseau
* [r2686] README: add Reiner SCT in the unsupported list. The
reader does not work
correctly.
* [r2685] src/ccid.h, src/ccid_usb.c: add support for Reiner SCT
* [r2684] readers/Makefile.am, readers/ReinerSCT.txt: add
ReinerSCT.txt
* [r2683] README, readers/supported_readers.txt: add Charismathics
token in the "Should work but untested by me" list
* [r2682] readers/Charismathics.txt, readers/Makefile.am: add
Charismathics.txt
2007-11-01 Ludovic Rousseau
* [r2679] src/parse.c: do not claim/release the device on Mac OS X
* [r2677] src/parse.c: if usb_claim_interface() fails we ask the
user to stop pcscd and retry
* [r2676] readers/Kobil_EMV_CAP.txt: new firmware
* [r2675] src/parse.c: claim and release the interface
2007-10-24 Ludovic Rousseau
* [r2674] README, readers/supported_readers.txt: add Eutron
Digipass 860 in the supported list
* [r2673] readers/Eutron_Digipass_860.txt, readers/Makefile.am: add
Eutron Digipass 860
* [r2672] readers/Eutron_CryptoIdentity.txt: new firmware
* [r2671] README, readers/supported_readers.txt: add "Eutron Smart
Pocket" in the supported list
* [r2670] readers/Eutron_Smart_Pocket.txt, readers/Makefile.am: add
Eutron_Smart_Pocket.txt
* [r2669] README, readers/supported_readers.txt: add "Kobil EMV CAP
- SecOVID Reader III" in the "should work" list
* [r2668] readers/Kobil_EMV_CAP.txt, readers/Makefile.am: add
Kobil_EMV_CAP.txt
2007-10-23 Ludovic Rousseau
* [r2667] readers/SCR3320.txt, readers/SCR333.txt,
readers/SCR3340.txt: firmware update
2007-10-21 Ludovic Rousseau
* [r2666] readers/SCR331.txt: regenerated on linux
* [r2665] readers/SCR331.txt: update firmware
* [r2664] src/ccid_usb.c: get_end_points(): check that dev->config
is not NULL before
dereferencing dev->config->bNumInterfaces
Avoid a crash on Mac OS X
2007-10-16 Ludovic Rousseau
* [r2656] README, readers/supported_readers.txt: add "Lenovo
Integrated Smart Card Reader" in "Should work but untested
by me" list
* [r2655] readers/Lenovo.txt, readers/Makefile.am: add Lenovo
Integrated Smart Card Reader
2007-10-15 Ludovic Rousseau
* [r2653] examples/scardcontrol.c: use SCARD_LEAVE_CARD instead of
SCARD_UNPOWER_CARD for SCardReconnect()
since SCardReconnect() returns SCARD_W_REMOVED_CARD on Mac OS X
10.4
2007-10-14 Ludovic Rousseau
* [r2652] readers/SCR3310.txt, readers/SCR3311.txt,
readers/SCR335.txt: new firmware version
2007-10-13 Ludovic Rousseau
* [r2650] src/parse.c: display "Can't find any CCID device. Maybe
you must run parse as root?"
if appropriate
2007-10-11 Ludovic Rousseau
* [r2649] readers/GemPCPinpad.txt, readers/GemPCTwin.txt: update
* [r2648] src/ifdhandler.c: typo in log message
2007-09-29 Ludovic Rousseau
* [r2632] configure.in:
contrib/Kobil_mIDentity_switch/Makefile.am:2: compiling
`Kobil_mIDentity_switch.c' with per-target flags requires
`AM_PROG_CC_C_O' in `configure.in'
2007-09-28 Ludovic Rousseau
* [r2631] contrib/Kobil_mIDentity_switch/Kobil_mIDentity_switch.c:
call usb_detach_kernel_driver_np() only if libusb provides it
(Linux
only)
* [r2630] configure.in: check for usb_detach_kernel_driver_np()
since only libusb on Linux provides it
* [r2629] examples/Makefile.am: use $(PTHREAD_CFLAGS) and
$(PTHREAD_LIBS) since the thread library must
be explicitly used on *BSD
* [r2628] readers/supported_readers.txt: add Eutron CryptoIdentity
* [r2627] readers/Eutron_CryptoIdentity.txt, readers/Makefile.am:
add Eutron CryptoIdentity (generated under FreeBSD 6.2-STABLE)
2007-09-21 Ludovic Rousseau
* [r2626] readers/supported_readers.txt: add Giesecke & Devrient
CardToken 350 and 550.
They were listed in the README, the web site but not in this
list.
2007-09-14 Ludovic Rousseau
* [r2624] configure.in: use PCSC_LIBS instead of LDLIBS in the
error message if
SCardEstablishContext() is not found
2007-08-21 Ludovic Rousseau
* [r2617] README, readers/supported_readers.txt: add SafeNet
IKey4000 in the "Should work but untested by me" list
* [r2616] readers/Makefile.am, readers/SafeNet_IKey4000.txt: add
SafeNet IKey4000
2007-08-03 Ludovic Rousseau
* [r2610] README: add Giesecke & Devrient StarSign Card Token 350
and 550 in the "Should
work but untested by me" list
* [r2609] src/Makefile.am: DISTCLEANFILES = Info.plist
so that make distcheck works
* [r2608] readers/GnD_StarSignCardToken350.txt,
readers/GnD_StarSignCardToken550.txt, readers/Makefile.am: add
Giesecke & Devrient StarSign Card Token 350 and 550
* [r2607] README: add OmniKey CardMan 5321 in the "Should work but
untested by me" list
* [r2606] readers/CardMan5321.txt, readers/Makefile.am,
readers/supported_readers.txt: add CardMan5321
2007-08-02 Ludovic Rousseau
* [r2605] .: update svn:ignore
* [r2604] README, readers/supported_readers.txt: add O2 Micro Oz776
(ProductID 0x7772) to the "Should work but untested
by me" list
* [r2603] readers/Makefile.am, readers/Oz776_7772.txt: add new
O2Micro Oz776
* [r2602] src/ccid.h, src/ccid_usb.c, src/commands.c: add support
of the O2Micro oz776 (ProductID 0x7772)
2007-07-05 Ludovic Rousseau
* [r2599] src/pcscd_ccid.rules: replace BUS by SUBSYSTEMS
* [r2597] examples/scardcontrol.c: add support for Mac OS X
2007-07-03 Ludovic Rousseau
* [r2596] src/ccid.c: ccid_error(): increase the size of var_text[]
to avoid a buffer overflow
Thanks to Anders Storsveen for the bug report
2007-07-02 Ludovic Rousseau
* [r2593] examples/scardcontrol.c: update version and copyright
date
* [r2592] examples/scardcontrol.c: remove compilation warnings
* [r2591] examples/scardcontrol.c: do not free() unallocated memory
* [r2590] examples/scardcontrol.c: use PCSC_ERROR_EXIT() for
SCardListReaders() call
* [r2585] examples/scardcontrol.c: display an explicit message when
no card is present
* [r2584] reconf: update versions of autotools used
* [r2583] build/ylwrap: regenerated using automake-1.10
2007-06-30 Ludovic Rousseau
* [r2582] readers/ActivkeySim.txt: update
2007-06-28 Ludovic Rousseau
* [r2581] src/pcscd_ccid.rules: use DRIVERS== instead of DRIVER==
2007-06-25 Ludovic Rousseau
* [r2579] README, readers/JCOP41V221.txt,
readers/supported_readers.txt: add "Philips Semiconductors
JCOP41V221" ICCD card in "Should work but
untested by me" list
2007-06-18 Ludovic Rousseau
* [r2566] readers/Sitecom_MD-010.txt: remove trash at end of file
2007-06-13 Ludovic Rousseau
* [r2557] src/commands.c: SecurePINVerify(): avoid a possible
buffer overflow detected by sparse
2007-05-19 Ludovic Rousseau
* [r2533] src/Makefile.am: generate a local Info.plist before
trying to install it
* [r2532] src/Info.plist, src/Info.plist.src: rename Info.plist as
Info.plist.src since it is just a template
2007-05-10 Ludovic Rousseau
* [r2526] README: typos
* [r2524] contrib/RSA_SecurID/RSA_SecurID_getpasswd.1: manpage
section is 1 instead of 8
* [r2522] README, configure.in: release 1.3.0
* [r2521] README, readers/Makefile.am, readers/e-gate.txt,
readers/supported_readers.txt: add SchlumbergerSema Cyberflex
Access e-gate in the should work list
* [r2520]
contrib/Kobil_mIDentity_switch/README_Kobil_mIDentity_switch.txt:
rename midswitch to Kobil_mIDentity_switch
* [r2519] examples, src: update svn:ignore properties
* [r2518] contrib/Kobil_mIDentity_switch, contrib/RSA_SecurID:
update snn:ignore properties
* [r2517] contrib, contrib/Kobil_mIDentity_switch,
contrib/RSA_SecurID: set svn:ignore properties
* [r2516] README, readers/Makefile.am, readers/Sitecom_MD-010.txt,
readers/supported_readers.txt: add Sitecom USB simcard reader
MD-010 in the "Should work but untested
by me" list
* [r2515] readers/supported_readers.txt: correct KOBIL mIDentity
names
2007-05-09 Ludovic Rousseau
* [r2514] src/pcscd_ccid.rules: exit if ACTION!="add"
2007-05-07 Ludovic Rousseau
* [r2511] src/commands.c: #include "ccid_usb.h" to avoid
commands.c:103: warning: implicit declaration of function
'ControlUSB'
2007-05-03 Ludovic Rousseau
* [r2510] src/ccid_usb.c: get_end_points(): avoid a double free on
close for the O2MICRO_OZ776
special case.
" In ccid_usb.c you move the extra descriptor from the endpoint 2
descriptor to the interface descriptor. The problem is, when
libusb try
to free the descriptors associated to this device on shutdown or
if the
device disappears, it tries to free the same buffer twice. For me
it
means the pcscd is killed with a glibc detected "double free". "
Thanks to Michael Wegner for the patch
* [r2509] README, readers/supported_readers.txt: add OmniKey
CardMan 4321 in "Should work but untested by me" list
* [r2508] readers/CardMan4321.txt, readers/Makefile.am: add
CardMan4321.txt
2007-03-28 Ludovic Rousseau
* [r2498] src/commands.c: define
BOGUS_SCM_FIRMWARE_FOR_dwMaxCCIDMessageLength and code to avoid
the bogus limitation of dwMaxCCIDMessageLength on SCM firmwares
2007-03-21 Ludovic Rousseau
* [r2489] src/ccid.c: ccid_open_hack(): add Dutch(nl) and
Tukish(tr) messages for the GemPC
pinpad
2007-03-20 Ludovic Rousseau
* [r2488] readers/SCR331-DI.txt, readers/SCR331.txt,
readers/SCR3310.txt, readers/SCR3311.txt: firmware updates
2007-03-19 Ludovic Rousseau
* [r2487] SCARDGETATTRIB.txt: improve documentation of
SCARD_ATTR_MAXINPUT
2007-03-15 Ludovic Rousseau
* [r2485] src/parse.c: if usb_control_msg() fails because the
device is busy this is because
pcscd has claimed the device already
* [r2484] README: add Fujitsu Siemens Computers SmartCard Keyboard
USB 2A and SmartCard
USB 2A to the "Should work but untested by me" list
* [r2483] readers/FujitsuSiemens_SmartCard_Keyboard_USB_2A.txt,
readers/FujitsuSiemens_SmartCard_USB_2A.txt, readers/Makefile.am,
readers/supported_readers.txt: add Fujitsu Siemens Computers
SmartCard USB 2A and SmartCard Keyboard
USB 2A readers
2007-03-13 Ludovic Rousseau
* [r2480] src/parse.c: use an unsigned char buffer[] to have
unsigned multi-bytes convertions
2007-03-12 Ludovic Rousseau
* [r2473] src/ifdhandler.c: move #include of config.h before
pcsclite.h and reader.h
2007-03-08 Ludovic Rousseau
* [r2472] src/commands.c, src/ifdhandler.c: In case of error set
the received length to 0 in IFDHTransmitToICC() and
IFDHControl() instead of in all the lower level commands
* [r2471] src/pcscd_ccid.rules: add SchlumbergerSema Cyberflex
Access e-gate ICCD
* [r2470] src/ccid.c, src/ccid.h, src/ccid_usb.c, src/commands.c:
add support of ICCD version A and B
* [r2469] src/ccid_usb.c: ControlUSB(): add some debug: request
value and data send/received
* [r2468] src/parse.c: bit 0x000800 of dwFeatures is undocumented
but used by ICCD?
2007-02-28 Ludovic Rousseau
* [r2454] readers/supported_readers.txt: differentiate the two
KOBIL mIDentity devices (Basic and Classic)
* [r2453] contrib/Kobil_mIDentity_switch/Kobil_mIDentity_switch.c:
usb_detach_kernel_driver_np() is not available on libusb for Mac
OS X
* [r2452] configure.in: require autoconf 2.61
* [r2451] configure.in: check for strlcpy
2007-02-27 Ludovic Rousseau
* [r2450] contrib/RSA_SecurID/RSA_SecurID_getpasswd.c: small
reformat
2007-02-26 Ludovic Rousseau
* [r2448] contrib/Kobil_mIDentity_switch/Kobil_mIDentity_switch.c:
replace a C++ comment by a C comment
2007-02-25 Ludovic Rousseau
* [r2444] contrib/Kobil_mIDentity_switch/Makefile.am,
contrib/RSA_SecurID/Makefile.am: EXTRA_DIST = $(doc_DATA)
$(man_MANS)
* [r2443] contrib/RSA_SecurID/Makefile.in: remove from SVN
* [r2442] src/pcscd_ccid.rules: add rule to call
/usr/sbin/Kobil_mIDentity_switch for mIDentity devices
* [r2441] README: move the Kobil mIDentity from the "Supported" to
"Unsupported or partly
supported" because of a time request problem
* [r2440] readers/supported_readers.txt: add (new) KOBIL mIDentity
* [r2439] contrib/Kobil_mIDentity_switch/Makefile.am: use
$(LIBUSB_LIBS) instead of -lusb
* [r2438] configure.in, contrib/Makefile.am, contrib/RSA_SecurID,
contrib/RSA_SecurID/Makefile.am, contrib/RSA_SecurID/Makefile.in,
contrib/RSA_SecurID/RSA_SecurID_getpasswd.1,
contrib/RSA_SecurID/RSA_SecurID_getpasswd.c: add
contrib/RSA_SecurID
* [r2437] contrib/GPL-2: add GNU GPL v2 licence
* [r2436] contrib/Kobil_mIDentity_switch/Kobil_mIDentity_switch.8,
contrib/Kobil_mIDentity_switch/Makefile.am: add manpage
Kobil_mIDentity_switch.8
* [r2435] contrib/Kobil_mIDentity_switch/Makefile.am: doc_DATA =
README_Kobil_mIDentity_switch.txt
* [r2434] contrib/Kobil_mIDentity_switch/README.txt,
contrib/Kobil_mIDentity_switch/README_Kobil_mIDentity_switch.txt:
rename README.txt in README_Kobil_mIDentity_switch.txt
* [r2433] contrib/Kobil_mIDentity_switch/Kobil_mIDentity_switch.c,
contrib/Kobil_mIDentity_switch/Makefile.am,
contrib/Kobil_mIDentity_switch/midswitch.c: rename midswitch{.c,}
in Kobil_mIDentity_switch{.c,}
* [r2432] configure.in, contrib/Kobil_mIDentity_switch,
contrib/Makefile.am, contrib/midswitch: rename contrib/midswitch/
in contrib/Kobil_mIDentity_switch/
2007-02-24 Ludovic Rousseau
* [r2431] Makefile.am, configure.in, contrib, contrib/Makefile.am,
contrib/midswitch, contrib/midswitch/Makefile.am,
contrib/midswitch/README.txt, contrib/midswitch/midswitch.c: add
contrib/midswitch to activate the CCID reader of the Kobil
mIDentity
2007-02-23 Ludovic Rousseau
* [r2430] src/commands.c: CmdPowerOn() & SecurePINVerify(): rename
6 local variables to avoid:
warning: declaration of 'cmd' shadows a previous local
* [r2429] src/parse.c: display the error message if
usb_control_msg() fails
* [r2428] src/parse.c: do not declare another buffer variable to
avoid: declaration of âbufferâ
shadows a previous local
* [r2427] src/ccid_usb.h: allow multiple inclusion using #ifndef
__CCID_USB_H__ ...
* [r2426] src/ccid_usb.c: get_end_points(): change parameter name
from usb_device to usbdevice to
avoid: warning: declaration of 'usb_device' shadows a global
declaration
/usr/include/usb.h:329: warning: shadowed declaration is here
* [r2425] src/ccid_usb.c: ControlUSB(): explicit cast to avoid
warning: pointer targets in passing
argument 6 of 'usb_control_msg' differ in signedness
* [r2424] src/ccid_usb.c: get_data_rates(): use ControlUSB()
instead of usb_control_msg()
* [r2423] src/ccid_usb.c, src/ccid_usb.h: add ControlUSB()
declaration and implementation
* [r2422] examples/scardcontrol.c: remove a redundant declaration
of i
scardcontrol.c:486: attention : declaration of âiâ shadows a
previous
local
2007-02-22 Ludovic Rousseau
* [r2421] src/commands.c: CmdXfrBlockTPDU_T0(): set *rx_length to 0
in case of command too long
* [r2420] src/commands.c: CmdXfrBlockTPDU_T0(): set *rx_length to 0
if CCID_Transmit() fails
2007-02-20 Ludovic Rousseau
* [r2407] examples/scardcontrol.c: Secure modify PIN: add a
bConfirmPIN and bNumberMessage table
* [r2406] src/commands.c: SecurePINModify(): set bNumberMessages in
all cases
* [r2405] examples/scardcontrol.c: set max pin size to 8 instead of
4
* [r2404] src/commands.c: SecurePINModify(): the GemPC Twin does
support different values of
bNumberMessages but all the bMsgIndex? must be present in the
CCID
command
2007-02-17 Ludovic Rousseau
* [r2399] src/ifdhandler.c: IFDHControl(): log the Rx and Rx
buffers
* [r2398] src/debug.h: add DEBUG_INFO_XXD()
2007-02-10 Ludovic Rousseau
* [r2393] src/ccid_usb.c: get_end_points(): correct bug in revision
2392
* [r2392] src/ccid_usb.c: get_end_points(): use
usb_interface->altsetting->bNumEndpoints instead
of the hardcoded value 3
2007-02-08 Ludovic Rousseau
* [r2391] src/pcscd_ccid.rules: use ATTRS{} instead of SYSFS{} for
use with recent udev versions
* [r2390] src/parse.c: parse bInterfaceProtocol field
* [r2389] src/parse.c: parse bNumEndpoints field
2007-02-05 Ludovic Rousseau
* [r2387] Makefile.am: ChangeLog: use svn2cl instead of svn2cl.sh
2007-01-30 Ludovic Rousseau
* [r2366] src/ccid.c: ccid_open_hack(): add the l10n of the 10th
string "PIN blocked"
* [r2365] src/ccid.c: ccid_open_hack(): add portugese strings for
the GemPC Pinpad.
Thanks to Stef Hoeben
2007-01-27 Ludovic Rousseau
* [r2363] README, configure.in: release 1.2.1
* [r2362] README: move the O2Micro Oz7762 from the unsupported to
the supported list since
patches to support it are applied by default
(O2MICRO_OZ776_PATCH)
* [r2361] src/pcscd_ccid.rules: add non CCID generic
(InterfaceClass: 0xFF) readers
* [r2360] readers/Makefile.am, readers/SK-3106.txt: SK-3106.txt is
a duplicate of DellSK-3106.txt
* [r2359] src/ccid_usb.c: Bogus_firmwares[]: the driver now
contains patches to circumvent the
Oz776 reader. It is then declared bogus only if
O2MICRO_OZ776_PATCH is
not defined
* [r2358] src/commands.c: T0ProcACK(): use a hack to circumvent the
Oz776 firmware bug with
commands of size modulo 64
2007-01-26 Ludovic Rousseau
* [r2357] src/commands.c: CmdGetSlotStatus(): the O2MICRO OZ 776
reader sends "card absent or
mute" errors when no card is inserted. We do not log this error
since it
is normal execution and just fill the syslog files
* [r2356] src/ccid.h, src/ccid_usb.c: move #define
O2MICRO_OZ776_PATCH from ccid_usb.c to ccid.h so we can use
it in other .c files
2007-01-24 Ludovic Rousseau
* [r2355] INSTALL: document how to use --enable-udev on FreeBSD.
Thanks to Tilman Linneweh
2007-01-20 Ludovic Rousseau
* [r2351] README: version 1.2.0 was released in 2007 not 2006 :-)
2007-01-19 Ludovic Rousseau
* [r2345] README, configure.in: release 1.2.0
* [r2342] config.h.in: removed since generated from configure.in by
autoheader
2007-01-18 Ludovic Rousseau
* [r2338] INSTALL: document udev use
* [r2337] INSTALL: pcsc-lite versions before 1.3.3 are not
supported so remove notes about
CHANNELID
* [r2336] INSTALL: add #CCID_compliant URL refenrece when a reader
is not yet supported
2007-01-10 Ludovic Rousseau
* [r2329] src/Makefile.am: do not install the pcscd_ccid.rules file
but display a message telling
so. The exact location of this file is Linux distribution
dependent.
Thanks to Alon Bar-Lev for the idea.
* [r2328] src/parse.c: typo: "busses" -> "buses"
Thanks to Martin Paljak for the patch
* [r2326] src/parse.c: add a missing \n in printf
2007-01-09 Ludovic Rousseau
* [r2322] src/Makefile.am: use 60-pcscd_ccid.rules instead of
50-pcscd_ccid.rules so udev default
> rules will run before are run before this one.
Thanks to Alon Bar-Lev.
2007-01-08 Ludovic Rousseau
* [r2318] src/Makefile.am: add pcscd_ccid.rules in EXTRA_DIST
Thanks to Kjell M. Myksvoll for the bug report
2007-01-06 Ludovic Rousseau
* [r2317] Makefile.am: add SCARDGETATTRIB.txt to EXTRA_DIST
* [r2316] examples/scardcontrol.c: use LPSTR instead or the
deprecated LPTSTR
* [r2315] src/Makefile.am: if --enable-udev is used we define
IFD_GENERATE_HOTPLUG in
ifdCapabilities and install the pcscd_ccid.rules for udev
* [r2314] src/create_Info_plist.pl: replace MAGIC_IFDCAPABILITIES
by the 3rd command line argument
* [r2313] src/Info.plist: use MAGIC_IFDCAPABILITIES
* [r2312] configure.in: add --enable-udev
* [r2311] src/pcscd_ccid.rules: udev file for hotplug capability
2007-01-04 Ludovic Rousseau
* [r2298] README: add "HP USB Smartcard Reader" in the "Should work
but untested by me" list
* [r2297] readers/HPUSBSmartCardReader.txt,
readers/supported_readers.txt: add HP USB Smartcard Reader
2007-01-02 Ludovic Rousseau
* [r2296] src/ccid_usb.c: CloseUSB(): free .dirname and .filename
only for the last slot
* [r2295] src/ccid_usb.c: OpenUSBByName(): move the "Checking
device: " log message out of the
usbDevice[] loop since we display info of the new device and not
of
a device from usbDevice[]
* [r2294] src/ccid_usb.c: struct _usbDevice: replace struct
usb_device *dev; by char *dirname; and
char *filename; since the libusb structure can be modified at any
time
by libusb (this structure is reused for another USB device when
the USB
device is removed)
* [r2293] src/ccid_usb.c: get_data_rates() now has a struct
usb_device *dev parameter to avoid
storing it in struct _usbDevice
* [r2292] src/ccid_usb.c, src/ccid_usb.h: remove unused get_desc()
function
* [r2291] src/ccid_usb.c: revert revisions 2289 and 2290
It is not the correct solution to the problem
* [r2290] src/ccid_usb.c: WriteUSB()/ReadUSB(): check that the
device entry is still valid before
using it
* [r2289] src/ccid_usb.c: WriteUSB()/ReadUSB(): call CloseUSB() as
soon as the device disapears
(ENODEV) since the libusb structures pointed by usbDevice[] may
be
reused by another USB device
2006-12-30 Ludovic Rousseau
* [r2288] configure.in: do not use two AM_CONDITIONAL() with the
same variable
Thanks to Alon Bar-Lev for the patch
* [r2287] configure.in: --disable-twinserial now works as expected.
Thanks to Alon Bar-Lev for the patch
2006-12-25 Ludovic Rousseau
* [r2285] src/commands.c: many commands: make sure we received at
least STATUS_OFFSET+1 bytes
before reading the value of buffer[STATUS_OFFSET]
usb_bulk_read() may return 0 bytes instead of an error when the
reader
is just disconnected
* [r2280] src/utils.c: GetNewReaderIndex(): check that Lun is NOT
already used
Thanks to Martin Preuss for the idea
2006-12-20 Ludovic Rousseau
* [r2278] README: add the OmniKey CardMan 1021 to the "Should work
but untested by me"
list
* [r2277] readers/CardMan1021.txt, readers/Makefile.am,
readers/supported_readers.txt: add OmniKey CardMan 1021
* [r2276] readers/CardMan3021.txt: a line was wrapped
2006-12-12 Ludovic Rousseau
* [r2275] SCARDGETATTRIB.txt: new file
2006-12-11 Ludovic Rousseau
* [r2271] configure.in: add PKG_PROG_PKG_CONFIG
2006-12-10 Ludovic Rousseau
* [r2270] INSTALL: add --enable-twinserial to build the serial
reader driver
2006-12-05 Ludovic Rousseau
* [r2269] readers/KAAN_Advanced.txt: upgrade firmware to 1.02
* [r2268] readers/KAAN_Base.txt: upgrade firmware to 1.02
2006-12-02 Ludovic Rousseau
* [r2260] src/openct/checksum.c: #include "checksum.h"
* [r2258] src/ifdhandler.c: warning: initialization discards
qualifiers from pointer target type
* [r2257] src/commands.c: warning: initialization discards
qualifiers from pointer target type
* [r2256] src/parse.c: remove unused argc and argv arguments
* [r2255] src/ccid.c, src/ccid.h: ccid_error(): "char *file"
argument -> "const char *file"
* [r2254] src/ccid.c: warning: assignment discards qualifiers from
pointer target type
* [r2253] src/ccid_ifdhandler.h: warning: redundant redeclaration
of 'LogLevel'
2006-11-30 Ludovic Rousseau
* [r2252] src/Makefile.am: use $(srcdir)/convert_version.pl
* [r2251] readers/Makefile.am: change C3PO_LTC32_USBv_old.txt in
C3PO_LTC32_USBv2_old.txt
2006-11-29 Ludovic Rousseau
* [r2240] configure.in: test if IFD_NO_SUCH_DEVICE is defined in
ifdhandler.h
* [r2239] configure.in: use AC_TRY_LINK_FUNC() instead of
AC_CHECK_LIB() to not hard code the use of
-lpcsclite
* [r2238] src/Makefile.am: distribute convert_version.pl
2006-11-23 Ludovic Rousseau
* [r2237] readers/C3PO_KBR36.txt, readers/C3PO_LTC32_USBv2.txt,
readers/C3PO_LTC32_USBv2_old.txt, readers/C3PO_TLTC2USB.txt,
readers/Makefile.am: add C3PO_* files
2006-11-22 Ludovic Rousseau
* [r2234] src/parse.c: exit if the command is not run as root and
getting iManufacturer fails
2006-11-18 Ludovic Rousseau
* [r2224] README, readers/supported_readers.txt: add C3PO TLTC2USB,
LTC32 USBv2 with keyboard support and KBR36 in the
"Should work but untested by me" list
2006-11-17 Ludovic Rousseau
* [r2223] src/ifdhandler.c: set IFSC in the SetParameters argument
for T=1 if TAi (i>2) is present: IFSC
Thanks to Stefan Neis for the bug report and patch
* [r2222] README, readers/Teo.txt, readers/supported_readers.txt:
add Teo by Xiring in the supported list
* [r2221] readers/LTC32.txt, readers/supported_readers.txt: add
C3PO LTC32
2006-11-15 Ludovic Rousseau
* [r2210] configure.in: we need pcsc-lite 1.3.3 since we now use
IFD_NO_SUCH_DEVICE
* [r2208] src/ifdhandler.c: IFDHICCPresence(): return the error
code returned by CmdGetSlotStatus()
instead of using IFD_COMMUNICATION_ERROR
* [r2207] src/commands.c: CmdGetSlotStatus(), CCID_Transmit() and
CCID_Receive(): return
IFD_NO_SUCH_DEVICE if the lower communication layer returns
STATUS_NO_SUCH_DEVICE
* [r2206] src/ccid_usb.c: WriteUSB() & ReadUSB(): return
STATUS_NO_SUCH_DEVICE if read() or
write() fails with ENODEV
* [r2205] src/defs.h: add STATUS_NO_SUCH_DEVICE
* [r2197] src/ifdhandler.c: IFDHGetCapabilities(): add support of
SCARD_ATTR_MAXINPUT to get the
maximal APDU size (dwMaxCCIDMessageLength -10)
2006-11-06 Ludovic Rousseau
* [r2195] src/commands.c: SecurePINVerify(): the GemPC Pinpad does
not support
a bEntryValidationCondition different of 0x02 (validation key
pressed)
2006-10-13 Ludovic Rousseau
* [r2186] configure.in, src/Makefile.am: remove unneeded dependency
on dl library
2006-09-26 Ludovic Rousseau
* [r2176] src/ifdhandler.c: IFDHICCPresence(): the patch in
revision 2150 was not correct.
SCardReconnect(..., SCARD_UNPOWER_CARD, ...) failed since the
card was reported as non present after the power off
* [r2175] src/ifdhandler.c: IFDHPowerICC(): log the action
performed (PowerUp, PowerDown, Reset)
2006-09-22 Ludovic Rousseau
* [r2174] README, readers/CardMan5125.txt,
readers/supported_readers.txt: add OmniKey CardMan 5125 in the
should work but unsupported list
* [r2173] README: update OmniKey URLs
* [r2172] README, readers/supported_readers.txt: move the RSA
SID800 in the supported list now that I have a working
model
* [r2171] readers/sid800.txt: update using a new SID800 model.
Unfortunately the firmware version has
not changed so it is not possible to detect a non working model
* [r2170] README: add O2Micro Oz7762 in the unsupported list
2006-09-20 Ludovic Rousseau
* [r2168] src/ifdhandler.c: IFDHGetCapabilities(): add support of
SCARD_ATTR_VENDOR_NAME
* [r2166] src/Makefile.am, src/ifdhandler.c: add support for
SCARD_ATTR_VENDOR_IFD_VERSION tag used by
SCardGetAttrib()
* [r2165] src/convert_version.pl: Perl script to convert a version
format from "1.2.3-svn-xyz" to "0x01020003"
2006-09-14 Ludovic Rousseau
* [r2163] README: update OmniKey URLs
* [r2162] README: the OmniKey 5125 was a 5121
* [r2161] readers/CardMan5121.txt, readers/CardMan5125.txt,
readers/supported_readers.txt: The reader was a 5121 in fact
2006-09-11 Ludovic Rousseau
* [r2156] configure.in: do not #include the tested .h file since it
is already included by the
macro. A double inclusion fails with SuSE gcc 4.1.0 with fdopen:
Bad
file descriptor
Thanks to Byron Johnson for the bug report
see
http://www.mail-archive.com/muscle@lists.musclecard.com/msg05632.html
2006-09-10 Ludovic Rousseau
* [r2155] README: add a note about Alcor Micro AU9520 firmware 1.01
bug (time request
not forwarded)
* [r2154] src/ccid_usb.c: Bogus_firm[]: firmware 1.01 for Alcor
AU9520 is bogus. The time request
of the card is not forwarded to the host by the reader.
* [r2153] readers/AU9520.txt: new firmware (1.02)
2006-09-06 Ludovic Rousseau
* [r2152] src/ccid.c, src/ccid.h, src/ccid_serial.c,
src/ccid_usb.c, src/commands.c, src/debug.h, src/defs.h,
src/ifdhandler.c, src/openct/proto-t1.c, src/parse.c,
src/towitoko/atr.c, src/towitoko/pps.c: remove trailing spaces at
end of lines
* [r2150] src/ifdhandler.c: IFDHICCPresence(): correctly support
the removal and insertion between
two consecutive IFDHICCPresence() calls
2006-08-11 Ludovic Rousseau
* [r2135] README, configure.in: release 1.1.0
* [r2134] configure.in, src/Makefile.am: use ./configure
--enable-twinserial to compile and install the the
driver for the GemPC Twin serial
Thanks to Wolfgang Glas for the idea
* [r2133] README, readers/CL1356T.txt, readers/Makefile.am: add id3
Semiconductors CL1356T in the "should work but unsuported" list
* [r2132] config.h.in: Regenerate
2006-08-10 Ludovic Rousseau
* [r2131] README, readers/Makefile.am, readers/iDream.txt: Add
iDream (or THRC2002-2) to the "Unsupported or partly supported
CCID
readers" list.
Thanks to Dr Jean-Pierre Szikora for the report
2006-08-09 Ludovic Rousseau
* [r2130] src/ifdhandler.c: IFDHCreateChannelByName(): add a "warm
up" sequence. This sequence is
sometimes needed when pcscd is restarted with the reader already
connected. We get some "usb_bulk_read: Resource temporarily
unavailable"
on the first few tries. It is an empirical hack
2006-08-07 Ludovic Rousseau
* [r2123] src/defs.h: CMD_BUF_SIZE should not include a byte for
the cmd. This definition was
reused as-is from the ifd-gempc source code.
Thanks to Wolfgang Glas for the bug report
2006-08-03 Ludovic Rousseau
* [r2122] src/ifdhandler.c: IFDHICCPresence(): check the value
returned by CmdEscape() in the
SCR331-DI contactless reader familly code.
Byg detected by using __attribute__((warn_unused_result)) also
used as
__must_check by the Linux kernel
* [r2121] src/utils.c, src/utils.h: change the prototype of
ReleaseReaderIndex() to return void since he
function always returned 0 and the returned value was never
checked
* [r2120] src/commands.c: SecurePINVerify()/SecurePINModify(): the
USB timeout shall be greater
than the reader timeout so we get the reader answer. I use a
margin of
10 seconds.
Thanks to Gerald Richter for the bug report
2006-08-01 Ludovic Rousseau
* [r2119] src/ccid_usb.c: ReadUSB(): check that
usbDevice[reader_index].dev->bus is still non-NULL
(as we do in WriteUSB()) before dereferencing it in the debug
message.
Thanks to Michael Wegner for the patch
* [r2118] configure.in: Exit the ./configure script if some include
files are not found
Use AC_MSG_ERROR() instead of AC_MSG_WARN()
2006-07-31 Ludovic Rousseau
* [r2117] config.h.in: regenerate
* [r2116] configure.in, examples/scardcontrol.c, src/ifdhandler.c:
use ntohl/htonl from arpa/inet.h since the tag value for
IOCTL_FEATURE_VERIFY_PIN_DIRECT and
IOCTL_FEATURE_MODIFY_PIN_DIRECT
_shall_ be encoded in big endian as documented in PCSC v2 part 10
ch 2.2
page 2.
The applications using this feature shall be updated (to respect
the
PCSC specification)
Thanks to Ulrich Vogl for the bug report
2006-07-12 Ludovic Rousseau
* [r2110] src/commands.c: CCID_Receive(): check that we received at
least enough bytes to test
cmd[STATUS_OFFSET].
usb_bulk_read() will return 0 bytes without error in case of
timeout
* [r2109] src/ifdhandler.c: use LPSTR instead of LPTSTR
(deprecated)
* [r2108] src/commands.c: SetParameters(): do not fail if the
command fails to set a parameter
that is not changeable by the CCID
2006-07-11 Ludovic Rousseau
* [r2107] src/ccid_usb.c: correct a typo in a comment
2006-07-09 Ludovic Rousseau
* [r2101] README, readers/AU9520.txt,
readers/supported_readers.txt: add Alcor Micro AU9520
* [r2100] README, readers/id3_CL1356D.txt,
readers/supported_readers.txt: add id3 Semiconductors CL1356D
2006-07-04 Ludovic Rousseau
* [r2099] config.h.in: update comment for size_t
* [r2098] src/commands.c: make pcscd detect a buffer overflow when
the receiving buffer is too
small instead of silently ignoring the detected problem. This
problem
only occured with readers supporting Extended APDU.
* [r2097] src/ccid_usb.c: ReadUSB(): be sure we have read enough
bytes before checking for frame
detectation
2006-07-03 Ludovic Rousseau
* [r2096] src/commands.c: CmdXfrBlock(): remove the unused
clean_up_and_return goto label
* [r2095] src/commands.c: CmdXfrBlock(): call
CmdXfrBlockAPDU_extended() if the reader supports
Extended APDU
* [r2094] src/commands.c: add CmdXfrBlockAPDU_extended() to support
Extended APDU readers
* [r2093] src/commands.c: CCID_Receive(): return the value of
bChainParameter in *chain_parameter
* [r2092] src/commands.c: CmdXfrBlockTPDU_T1(): also log the length
of the reception buffer
* [r2091] src/commands.c, src/openct/proto-t1.c,
src/towitoko/pps.c: use CCID_Receive() with the new API (use NULL
as chain_parameter)
* [r2090] src/commands.c, src/commands.h: CCID_Receive() has a new
parameter: chain_parameter
* [r2089] src/commands.h: add #define CHAIN_PARAMETER_OFFSET
* [r2088] src/commands.c: move the "command length too big" checks
from CmdXfrBlock() to
CmdXfrBlockTPDU_T0()
* [r2087] src/commands.c: CCID_Transmit(): log if the transmit
buffer is too big
* [r2086] src/commands.c: CCID_Receive(): use <= instead of < to
detect a reception buffer overrun
and log an error if it occurs
* [r2085] src/ccid.c: ccid_open_hack(): the CL1356D firmware needs
some time to initialize.
Wait 1 second here
* [r2084] src/ccid.h: add #define CL1356D
* [r2083] src/ccid_usb.c: ReadUSB(): detect and ignore duplicated
CCID frames
2006-06-30 Ludovic Rousseau
* [r2082] src/ccid.c: ccid_error(): display the value of the
Unknown CCID error code
2006-06-08 Ludovic Rousseau
* [r2078] configure.in: add support of FreeBSD
2006-05-25 Ludovic Rousseau
* [r2055] src/Info.plist: update the licence from GPL to LGPL
2006-05-19 Ludovic Rousseau
* [r2048] src/ccid_usb.c: SCM SPR 532 with firmware < 5.10 has
problems
* [r2047] readers/SPR532.txt: update with firmware 5.10
* [r2046] src/openct/proto-t1.c: t1_transceive(): add a overrun
debug message if we received more bytes
than we can store.
* [r2045] src/openct/proto-t1.c: t1_transceive(): add a debug
message if we are in state DEAD. The card
must be reset first.
2006-05-16 Ludovic Rousseau
* [r2044] readers/ActivkeySim.txt, readers/supported_readers.txt:
add Actividentity (ActiveCard) Activkey Sim
2006-05-10 Ludovic Rousseau
* [r2041] src/ccid.h: correct a typo in a comment
2006-05-04 Ludovic Rousseau
* [r2039] examples/scardcontrol.c: Use a timeout of 0.1 second
instead of 0 for waiting characters from the
keyboard
* [r2038] README, readers/supported_readers.txt: add C3PO LTC31
(new model, USB product id 0x0006) in the supported list
* [r2037] README, readers/supported_readers.txt: add "HP USB Smart
Card Keyboard" in the "Should work but untested by
me:" list
* [r2036] readers/HPUSBSmartCardKeyboard.txt, readers/Makefile.am:
add HPUSBSmartCardKeyboard.txt
2006-05-03 Ludovic Rousseau
* [r2035] src/ccid.c: ccid_open_hack(): add SCM SCR331-DI-NTTCOM in
the list of dual slots
contactless readers hack
* [r2034] README, readers/CardMan3021.txt, readers/Makefile.am: add
OmniKey CardMan 3021 in the "Should work but untested by me" list
* [r2033] readers/LTC31v2.txt, readers/Makefile.am: add LTC31 (new
version)
* [r2032] src/parse.c: I used the MSB instead of LSB in parsing
dwSynchProtocols
2006-04-23 Ludovic Rousseau
* [r2026] COPYING: update the Free Software Foundation postal
address
2006-04-22 Ludovic Rousseau
* [r2022] src/Makefile.am: add $(PROVIDED_BY_PCSC) to
libccidtwin_la_SOURCES so that libccidtwin
uses its own log_xxd/log_msg when configured with
--disable-pcsclite
* [r2021] src/Makefile.am: add $(TOKEN_PARSER) to
libccidtwin_la_SOURCES
* [r2020] README, configure.in: release 1.0.1
2006-04-20 Ludovic Rousseau
* [r2019] src/ifdhandler.c: declare the functions to export as
EXTERNAL
* [r2017] readers/ACR38U-CCID.txt, readers/CardMan3121.txt,
readers/CryptoIdentity.txt, readers/GemPCKey.txt,
readers/GemPCTwin.txt, readers/KAAN_Advanced.txt,
readers/KAAN_Base.txt, readers/KAAN_SIM_III.txt,
readers/LTC31.txt, readers/MySmartPad.txt, readers/Oz776S.txt,
readers/SCR331-DI.txt, readers/SCR331.txt, readers/SCR3310.txt,
readers/SCR335.txt, readers/SCR355.txt,
readers/SIM_Pocket_Combo.txt, readers/SPR532.txt,
readers/Verisign_secure_storage_token.txt, readers/mIDentity.txt,
readers/sid800.txt: regenerate using the latest version of parse
* [r2016] README, readers/CardMan3621.txt, readers/Makefile.am,
readers/supported_readers.txt: add OmniKey CardMan 3621 in the
"Should work but untested by me" list
Thanks to Bruce Stephens.
2006-04-18 Ludovic Rousseau
* [r2014] src/ccid_usb.c: declare get_ccid_usb_interface() as
EXTERNAL since this function is used
by src/parse
* [r2013] src/ifdhandler.c: #include "misc.h" so that ifdhandler.h
functions are declared EXTERNAL
* [r2012] src/Makefile.am: add $(SYMBOL_VISIBILITY) to
libccid_la_CFLAGS and libccidtwin_la_CFLAGS
* [r2011] configure.in: add code to detect the support of
-fvisibility=hidden
* [r2007] src/Makefile.am, src/misc.h, src/parser.h, src/strlcpy.c,
src/strlcpycat.h, src/tokenparser.l: use tokenparser.l and
parser.h from pcsc-lite (using a symlink in
subversion). So we also need strlcpy.c, strlcpycat.h and misc.h
* [r2006] src/parser.h, src/tokenparser.l: remove
* [r2005] configure.in, src/Makefile.am: always use our own
tokenparser.l even when pcsc-lite is used (do not use
LTPBundleFindValueWithKey from pcscd)
2006-04-14 Ludovic Rousseau
* [r2004] readers/Makefile.am: add SCR3311.txt, SCR355.txt and
SDI010.txt
* [r2003] readers/SDI010.txt, readers/SSI010.txt: rename SSI010.txt
in SDI010.txt
* [r2002] src/ccid_usb.c: firmwares for Athena ASE IIIe USBv2 and
ASE IIIe KB USB were bogus.
* [r2001] readers/Makefile.am: add ASE_IIIe.txt and
ASEDrive_IIIe_KB.txt
* [r2000] README, readers/ASEDrive_IIIe_KB.txt,
readers/supported_readers.txt: add Athena ASE IIIe KB USB
* [r1999] readers/ASE_IIIe.txt: update firmware version
2006-03-28 Ludovic Rousseau
* [r1986] src/commands.c: SecurePINVerify() and SecurePINModify():
Make sure
bEntryValidationCondition is valid
The Cherry XX44 keyboard smart card reader crashes when a wrong
value is
used
2006-03-27 Ludovic Rousseau
* [r1985] examples/scardcontrol.c: Modify PIN: use a for() loop
instead of 3 fgets() since we will not read
every "PIN" if the command is aborted
* [r1984] src/commands.c: SecurePINVerify(): debug a debug message.
use dw2i(TxBuffer, 15) instead
of just the first byte TxBuffer[15]
* [r1983] src/commands.c: SecurePINModify(): separate the
validation test in three different tests
and add a debug message for each test
* [r1982] src/commands.c: SecurePINVerify(): debug a debug message
:-)
* [r1981] src/ccid.h, src/commands.c: SecurePINModify(): circumvent
a bug in Cherry XX44 keyboard firmware
2006-03-21 Ludovic Rousseau
* [r1969] README: add Gemplus GemPC Card in the "supported" list
* [r1968] README, readers/Makefile.am, readers/Winbond.txt,
readers/supported_readers.txt: add Winbond Electronics W81E381
chipset
* [r1951] README: add SCM Micro SDI 010 in the "Should work" list
* [r1950] readers/SSI010.txt, readers/supported_readers.txt,
src/ccid.c, src/ccid.h, src/ifdhandler.c: add support for SCM SDI
010 contactless reader
thanks to Oleg Makarenko for the patch
* [r1949] readers/AxaltoV3.txt, readers/Makefile.am: add Axalto
Reflex USB V3
2006-03-20 Ludovic Rousseau
* [r1945] README, readers/supported_readers.txt: add Axalto Reflex
USB v3 in the "should work" list
* [r1944] configure.in: document --disable-multi-thread instead of
--enable-multi-thread since
safe threading is used by default
* [r1943] configure.in: document --disable-pcsclite instead of
--enable-pcsclite since pcsc-lite
is used by default
* [r1942] configure.in: display the status "use libusb : yes/no"
document --disable-libusb instead of --enable-libusb since libusb
is
used by default.
2006-03-06 Ludovic Rousseau
* [r1927] src/ccid_usb.h: use #if defined (__USB_H__) || defined
(_SYS_USB_LIBUSB_USB_H) instead
of #ifdef __USB_H__ to support the Solaris libusb
thanks to Iain MacDonnell for the patch
* [r1926] configure.in: remove CFLAGS="$CFLAGS -Wall" since it is
GCC specific
* [r1925] configure.in: add support of Solaris
2006-03-03 Ludovic Rousseau
* [r1911] README: release 1.0.0
* [r1910] configure.in: version 1.0.0
* [r1909] README: add OmniKey CardMan 3821 and CardMan 6121 in the
"Should work but
untested by me" list
* [r1908] readers/CardMan3821.txt, readers/CardMan6121.txt,
readers/Makefile.am, readers/supported_readers.txt: add OmniKey
CardMan 3821 and CardMan 6121
* [r1905] README: update the "Debug informations:" chapter. The two
options comm and
periodic have been swaped
* [r1904] readers/CherrySmartTerminalST2XXX.txt: new firmware
(5.08)
2006-02-28 Ludovic Rousseau
* [r1903] readers/Makefile.am, readers/SCR333.txt: add SCR333.txt
* [r1886] src/ifdhandler.c: IFDHSetProtocolParameters(): if the
card is in specific mode and request
a speed not supported by the reader we return
IFD_COMMUNICATION_ERROR
instead of IFD_PROTOCOL_NOT_SUPPORTED so that pcsc-lite do not
try to
talk to the card
2006-02-24 Ludovic Rousseau
* [r1883] README: add URL for the Cherry SmartTerminal ST2000U
2006-02-21 Ludovic Rousseau
* [r1876] README: - move the ActivCard USB reader 2.0 from "Should
work but untested by me"
to "Unsupported or partly supported CCID readers"
- add the ActivCard USB reader 3.0 in the "Supported CCID
readers" list
* [r1875] src/ccid_usb.c: the ActivCard V2 is bogus (problem with
wMaxPacketSize size frames)
* [r1874] readers/Makefile.am: distribute ActivCardV2.txt and
ActivCardV3.txt
* [r1873] readers/supported_readers.txt: add ActivCard USB Reader
3.0
* [r1872] readers/ActivCardV2.txt, readers/ActivCardV3.txt: add
ActivCard v2 and v3 descriptions
* [r1870] Makefile.am: correct the Perl regexp in ChangeLog rule
* [r1869] Makefile.am: add subversion revision in ChangeLog.svn
2006-02-20 Ludovic Rousseau
* [r1867] readers/Makefile.am: add SCM SCR3320.txt and SCR3340.txt
* [r1866] readers/SCR3320.txt: add SCM SCR3320 - Smart Card Reader
* [r1865] readers/SCR3340.txt: add SCR3340 - ExpressCard54 Smart
Card Reader
2006-02-07 Ludovic Rousseau
* [r1864] README, readers/supported_readers.txt: add "SCM SCR 3340
ExpressCard54" in the "Should work but untested by me"
list
* [r1863] README: add Gemplus GemPC Express in the "Should work but
untested by me" list
* [r1862] readers/GemPC_Express.txt, readers/Makefile.am,
readers/supported_readers.txt: add Gemplus GemPC Express
2006-02-06 Ludovic Rousseau
* [r1861] readers/supported_readers.txt: rename POS Pro & SIM Pro
to a more real name "Gemplus GemCore xxx"
* [r1860] src/commands.c: SecurePINVerify/SecurePINModify: get the
data from a T=1 TPDU block only
if the exchange was successful (with special treatment for
timeout and
cancel cases)
* [r1859] src/commands.c: SecurePINVerify(): move the prologue
filing part to be homogenous with
SecurePINModify()
* [r1858] src/commands.c: SecurePINModify(): add support of T=1
cards with TPDU readers
* [r1857] src/commands.c: SecurePINVerify(): add support of T=1
cards with TPDU readers
* [r1856] src/openct/proto-t1.c, src/openct/proto-t1.h: export
t1_build() and some constants
* [r1855] src/ifdhandler.c: IFDHSetProtocolParameters(): store the
card protocol in
ccid_desc->cardProtocol
* [r1854] src/ccid.h: add a cardProtocol field to store the card
protocol in use
2006-01-30 Ludovic Rousseau
* [r1846] configure.in: add support for OpenBSD
* [r1845] examples/Makefile.am, src/Makefile.am: use $(foo) instead
of @foo@ to do not replace the values but the variables
* [r1842] configure.in: when checking for PCSC exit with en error
only if
/usr/local/lib/pkgconfig/libpcsclite.pc exists _and_ pkg-config
is
installed
2006-01-25 Ludovic Rousseau
* [r1841] readers/Makefile.am: add CardMan5125.txt
* [r1840] README: add OmniKey CardMan 5125 in the "Should work but
untested by me" list
* [r1839] readers/CardMan5125.txt, readers/supported_readers.txt:
add OmniKey CardMan 5125
2006-01-24 Ludovic Rousseau
* [r1834] readers/supported_readers.txt: add SmartEpad
* [r1833] README: add SmartEpad (v 2.0) in the supported list
* [r1832] src/ccid.c, src/ccid.h: add support for the SmartEpad (v
2.0) reader (MYSMARTPAD)
* [r1831] readers/Makefile.am: add MySmartPad.txt
2006-01-20 Ludovic Rousseau
* [r1820] README, readers/SCR3311.txt: move the SCM Micro SCR 3311
from the "should work" list to the
"supported" list
* [r1819] src/parse.c: rewrite to scan the devices ourself instead
of calling
IFDHCreateChannel(). No need to have an updated Info.plist
anymore.
* [r1818] src/ccid_usb.c: get_ccid_usb_interface(): use the same
code for a device with 1 or >1
interfaces
2006-01-18 Ludovic Rousseau
* [r1815] README: add Gemplus GemPC PinPad, Gemplus GemCore POS Pro
& Gemplus GemCore SIM Pro
* [r1814] INSTALL: document the configuration of /etc/reader.conf
for a GemPC PinPad, a
GemCore POS Pro or a GemCore SIM Pro
* [r1810] readers/GemCoreSIMPro.txt, readers/Makefile.am: add
GemCore SIM Pro
* [r1809] readers/supported_readers.txt: add GemCore POS Pro &
Gemplus SIM Pro
--Cette ligne, et les suivantes ci-dessous, seront ignorées--
M readers/supported_readers.txt
* [r1808] src/ccid.h, src/ccid_serial.c, src/ccid_usb.c,
src/defs.h, src/reader.conf.in: add support of GemCore SIM Pro
and GemCore POS Pro (serial and USB).
* [r1807] src/ccid_usb.c: CloseUSB(): free the allocated
arrayOfSupportedDataRates only for the
pimary slot. The other slots of the same reader either point to
the
same array or point to a statically allocated array.
* [r1806] src/ifdhandler.c: IFDHSetProtocolParameters(): exit the
while if you find a correct speed
in the case of a card too fast
* [r1805] src/ccid.c: ccid_open_hack(): update the spanish PIN Pad
string since the number of
remaining tries in always displayed at the first character
2006-01-17 Ludovic Rousseau
* [r1804] src/ccid_usb.c: OpenUSBByName(): check that
usbDevice[previous_reader_index].dev is
still valid before dereferencing it
Thanks to Martin Paljak for the bug report
* [r1803] src/Makefile.am: use @PTHREAD_CFLAGS@ and @PTHREAD_LIBS@
* [r1802] configure.in: use LIBS instead of LDLIBS when checking if
pcsc-lite is installed
* [r1801] src/ccid_serial.c: OpenSerialByName(): call CloseSerial()
if the "Get firmware" or "Change
card movement notification" command failed
2006-01-16 Ludovic Rousseau
* [r1800] src/commands.c, src/commands.h: SecurePINVerify(): bug
circumvention for the GemPC Pinpad
(bNumberMessage)
2006-01-12 Ludovic Rousseau
* [r1799] src/ccid.c: ccid_open_hack(): use { } around DEBUG_COMM()
in an if-else since
DEBUG_COMM() is not a function but an multi-instruction macro
2006-01-11 Ludovic Rousseau
* [r1798] readers/GemPCPinpad.txt, readers/supported_readers.txt:
add Gemplus GemPC Pinpad
* [r1797] src/ifdhandler.c: IFDHSetProtocolParameters(): if the
card is faster than the reader
(TA1=97 for example) we try to use a no so bad speed
(corresponding to
TA1=96, 95 or 94) instead of the default speed of TA1=11
* [r1796] src/ccid.c: ccid_open_hack(): load the localisation
strings according to LANG
environment variable. Languages supported: de, en, es, fr, it
* [r1795] src/Info.plist, src/ccid.c: move the comment about APDU
mode from ccid_open_hack() to Info.plist
since it is configured there
* [r1794] src/ccid.h, src/commands.c: SecurePINModify(): bug
circumvention for the GemPC Pinpad
* [r1793] src/commands.c, src/commands.h: SecurePINModify(): modify
the user command to make the SPR 532 and
Cherry ST 2000C firmware happy
* [r1792] src/ccid_usb.c: OpenUSBByName(): use log level INFO
instead of CRITICAL to display
copyright information
* [r1791] src/ccid_usb.c: release the allocated ressources only
when the last slot of a multi-slot
reader is closed
* [r1790] src/Info.plist, src/ccid.h, src/commands.c,
src/commands.h, src/ifdhandler.c: allow to select the power on
voltage using Info.plist instead of
recompiling the source code
2006-01-03 Ludovic Rousseau
* [r1789] README, readers/supported_readers.txt: add SCM Micro SCR
3311 and 3320 in the "Should work but untested by me"
list
* [r1788] README: add URL for SCM Micro SCR 3310
* [r1787] README, readers/SCR355.txt,
readers/supported_readers.txt: add support for SCM Micro SCR 355
2006-01-02 Ludovic Rousseau
* [r1785] readers/Makefile.am: use ACR38U-CCID.txt instead of
ACR38.txt
* [r1784] configure.in: use pkg-config for libusb if available
2005-12-14 Ludovic Rousseau
* [r1782] readers/Verisign_secure_storage_token.txt: update with
new ./parse version
2005-12-08 Ludovic Rousseau
* [r1780] src/ifdhandler.c: typo in a comment
* [r1779] INSTALL: The GemPC Twin is not the only serial CCID
reader
2005-12-07 Ludovic Rousseau
* [r1778] README, readers/ACR38.txt, readers/ACR38U-CCID.txt,
readers/supported_readers.txt: replace ACR 38 by ACR 38U-CCID
since they are two different readers
2005-12-01 Ludovic Rousseau
* [r1776] README, readers/ASE_IIIe.txt,
readers/supported_readers.txt: add Athena ASE IIIe USB V2 in
"Supported CCID readers" list
2005-11-29 Ludovic Rousseau
* [r1775] src/ccid_usb.c: OpenUSBByName(): do not (re)set the
usbDevice[].ccid.pbSeq field since
we just copied the complete structure just before
* [r1774] src/ifdhandler.c: Avoid a possible division by 0 if f or
d parameter is null.
This could happen only with non-ISO cards with TA1=0x00 or other
undefined values
* [r1773] src/towitoko/atr.c: add support of non-ISO TA1=0x97 (Di=7
is/was RFU)
* [r1771] examples/scardcontrol.c, src/ccid.c, src/ccid_serial.c,
src/commands.c, src/defs.h, src/ifdhandler.c,
src/openct/proto-t1.c, src/towitoko/defines.h,
src/towitoko/pps.c, src/utils.c: remove PCSC/ from the pcsc-lite
#include header files since the PCSC/
part is already given by `pkg-config --cflags libpcsclite`
* [r1770] configure.in: rewrite the libusb detection code to:
- use libusb-config if available
- --enable-libusb do not give a path anymore but just a yes/no
status.
paths/arguments/etc must be given using LIBUSB_CFLAGS and
LIBUSB_LIBS
- use AC_TRY_LINK_FUNC() instead of AC_CHECK_LIB() so we do not
explicitely give the library name. This name should come from
LIBUSB_LIBS
* [r1769] configure.in: in libusb detection code: restore CPPFLAGS
to $saved_CPPFLAGS instead of
$saved_LIBS
* [r1768] configure.in: recommand the use of PCSC_CFLAGS=...
instead of CFLAGS=... to find the
pcsc-lite headers
* [r1767] configure.in: use $CPPFLAGS instead of $CFLAGS since we
only need to set the C
preprocessor to find the .h files
2005-11-27 Ludovic Rousseau
* [r1761] README: release 0.9.4
* [r1760] readers/MySmartPad.txt: new file for MySMART PAD V2.0
* [r1759] README: add Cherry SmartTerminal ST2XXX
* [r1758] readers/Makefile.am: add 3 missing reader descriptions
2005-11-24 Ludovic Rousseau
* [r1754] configure.in: we need pcsc-lite 1.2.9-beta9 or greater
* [r1752] src/ifdhandler.c: IFDHGetCapabilities(): use info instead
of comm debug level to print the
number of slots supported by the reader
* [r1751] examples/scardcontrol.c: update copyright date
* [r1750] examples/scardcontrol.c: in Modify PIN command we need to
read 3 lines from the keyboard (old,
new and confirm PINs)
* [r1749] examples/scardcontrol.c: use a buffer of 40 instead of 10
to reader the keyboard since the PIN
may be longer than 8 digits
* [r1747] src/commands.c: SecurePINVerify()/SecurePINModify(): set
the response length to 0 in
case of (write) communication error
* [r1746] src/commands.c: SecurePINModify(): set the response
length to 0 in case of error in the
command format
* [r1745] src/ifdhandler.c: IFDHControl(): use
sizeof(PCSC_TLV_STRUCTURE) instead of 6
* [r1743] examples/scardcontrol.c: my check if the applet is
present was wrong
* [r1742] examples/scardcontrol.c: exit if the test applet is not
found
* [r1740] configure.in: do not duplicate the definition of
PCSCLITE_HP_DROPDIR in
--enable-ccidtwindir since it is already defined in
--enable-usbdropdir
This prevented the successful execution of ./configure when
-pedantic-errors is used
* [r1739] src/openct/proto-t1.c: t1_xcv(): correct the comment
about &rmax
* [r1738] src/openct/proto-t1.c: t1_xcv(): the second argument of
CCID_Receive() is (unsigned int *)
so we can't use &rmax since &rmax is a (size_t *) and may not
be the same on 64-bits architectures for example (iMac G5) */
* [r1737] configure.in, src/Makefile.am: tokenparser.l is only
needed when pcscd is not used (Solaris). It is not
needed on Mac OS X since LTPBundleFindValueWithKey() is provided
by
pcscd
* [r1735] configure.in: use libusb-config(1) to get, if possible,
correct values for LIBUSB_CFLAGS
and LIBUSB_LIBS
* [r1734] configure.in: replace dnl by #
* [r1733] configure.in, src/Makefile.am: use
LIBUSB_CFLAGS/LIBUSB_LIBS instead of LDFLAGS/CPPFLAGS for libusb
configuration
2005-11-22 Ludovic Rousseau
* [r1730] README: add the "SCM Micro SCR 3310-NTTCOM" in the
"Should work but untested by
me" list.
See
http://archives.neohapsis.com/archives/dev/muscle/2005-q4/0217.html
* [r1729] readers/supported_readers.txt: add SCM SCR 3310 NTTCom.
See
http://archives.neohapsis.com/archives/dev/muscle/2005-q4/0217.html
2005-11-16 Ludovic Rousseau
* [r1717] examples/scardcontrol.c: Modify PIN: use a 4 digit PIN so
we can test it using the test Java Card applet
* [r1716] examples/scardcontrol.c: Modify PIN: bInsertionOffsetOld
and bInsertionOffsetNew starts from the
APDU data (5th byte) and not the APDU start (first byte)
* [r1715] examples/scardcontrol.c: add a modify PIN dump command
* [r1714] examples/scardcontrol.c: Modify PIN: add a comment for
bNumberMessage
* [r1713] examples/scardcontrol.c: Modify PIN: use 0x03 for
bNumberMessage since the GemPC Pinpad rejects
any other valu. The SPR 532 needs 0 here
* [r1712] examples/scardcontrol.c: verify PIN: use 0x01 for
bNumberMessage for the GemPC Pinpad
* [r1711] examples/scardcontrol.c: verify PIN: use 0x02 (validation
key pressed) for
bEntryValidationCondition as the GemPC Pinpad rejects any other
values
2005-11-15 Ludovic Rousseau
* [r1705] Makefile.am: use svn2cl.sh instead of rcs2log since we
migrated to subversion
* [r1704] src/commands.c: SecurePINModify(): set the readTimeout to
at least 30 seconds since we
are not waiting after an APDU but after a human (after the reader
in
fact).
2005-11-07 Ludovic Rousseau
* [r1703] src/ccid_serial.c, src/ccid_usb.c: remove #ifdef
DEBUG_LEVEL_COMM since DEBUG_LEVEL_COMM is a numeric value
and not a compilation flag anymore. Debug is always active and
filtered
by pcscd.
* [r1702] src/Info.plist, src/debug.h: exchange COMM and PERIODIC
debug values so that all except PERIODIC
value is 7
2005-10-30 Ludovic Rousseau
* [r1701] src/commands.c: SecurePINModify(): correct management of
bMsgIndex2 and bMsgIndex3
* [r1700] src/commands.c: SecurePINModify(): do not copy the
ulDataLength field to the CCID frame
* [r1699] src/ccid.h: #define CHERRYST2000
2005-10-19 Ludovic Rousseau
* [r1692] readers/SPR532.txt: firmware 5.07
* [r1691] examples/scardcontrol.c: declare offset, pin_verify and
pin_modify variable only if needed
2005-09-27 Ludovic Rousseau
* [r1677] src/commands.c: CCID_Transmit(): cmd[8-9] is the expected
length in character mode only.
It shall be 0x0000 for TPDU and short APDU modes.
2005-09-26 Ludovic Rousseau
* [r1676] examples/scardcontrol.c: use the new HandlerTest applet
commands
* [r1675] src/commands.c: SecurePINVerify(): set the readTimeout to
at least 30 seconds since we
are not waiting after an APDU but after a human.
* [r1674] src/ccid.h: _ccid_descriptor.readTimeout is in seconds
even for USB. The comment was
wrong
2005-09-20 Ludovic Rousseau
* [r1670] src/commands.c: SecurePINVerify(): update the size of
ulDataLength field as defined in
PCSCv2 part 10, revision 2.01.04, september 2005
* [r1669] examples/scardcontrol.c: use
HOST_TO_CCID_16/HOST_TO_CCID_32
2005-09-05 Ludovic Rousseau
* [r1641] src/ccid_usb.c: get_data_rates(): check the response size
only if bNumDataRatesSupported
is non zero
* [r1640] src/parse.c: if bNumDataRatesSupported is 0 we get the
list size from what
GET DATA RATES command returns
idem for bNumClockSupported
* [r1639] src/parse.c: do not request data rates if the reader
reports it support a 0 length
list. Idem for clocks.
* [r1638] src/parse.c: print bNumClockSupported: as %d and not
0x%02X
2005-09-01 Ludovic Rousseau
* [r1635] examples/scardcontrol.c: also work with T=1 cards
* [r1634] examples/scardcontrol.c: debug modify PIN test code
* [r1633] readers/supported_readers.txt: add Cherry ST1044U
* [r1632] readers/CherrySmartTerminalST2XXX.txt,
readers/supported_readers.txt: add Cherry SmartTerminal ST-2XXX
* [r1631] examples/scardcontrol.c: add sample code to perform
FEATURE_VERIFY_PIN_DIRECT and
FEATURE_MODIFY_PIN_DIRECT if the reader supports it
* [r1630] src/ccid_ifdhandler.h, src/commands.c, src/commands.h,
src/ifdhandler.c: add support of PC/SC v2 part 10
CM_IOCTL_GET_FEATURE_REQUEST
add support of FEATURE_VERIFY_PIN_DIRECT and
FEATURE_MODIFY_PIN_DIRECT
remove support of IOCTL_SMARTCARD_VENDOR_VERIFY_PIN (now
obsoleted)
2005-08-25 Ludovic Rousseau
* [r1626] README: add Cherry ST-1044U in the supported list
* [r1625] readers/CherryST1044U.txt: new file
2005-08-21 Ludovic Rousseau
* [r1622] README: move the "Cherry XX44 keyboard" from "should
work" to "supported" list
2005-08-16 Ludovic Rousseau
* [r1619] .cvsignore, aclocal/.cvsignore, build/.cvsignore,
examples/.cvsignore, readers/.cvsignore, src/.cvsignore,
src/towitoko/.cvsignore: removed since we use SVN and not CVS
anymore
Thanks to Martin Paljak for the idea
2005-08-13 Ludovic Rousseau
* [r1614] src/Info.plist: document DRIVER_OPTION_RESET_ON_CLOSE
* [r1613] src/ccid_usb.c: CloseUSB(): call usb_reset() only if
DRIVER_OPTION_RESET_ON_CLOSE is
set.
The problem was that a device reset also disconnects the keyboard
on a
keyboard + reader device.
* [r1612] src/ccid_ifdhandler.h: #define
DRIVER_OPTION_RESET_ON_CLOSE
2005-08-11 Ludovic Rousseau
* [r1610] readers/CherryXX44.txt: update adding clock frequencies
and data rates
* [r1609] src/parse.c: check that we do not receive more data rates
anc clock frequencies than the
reader supports
* [r1608] src/ccid_usb.c: get_data_rates(): check that we do not
get more data rates than the
reader supports
2005-08-03 Ludovic Rousseau
* [r1600] src/commands.c: CCID_Receive(): log time extension
messages at priority COMM instead of
CRITICAL.
Thanks to Martin Paljak for the patch.
2005-08-02 Ludovic Rousseau
* [r1585] src/ccid_usb.c: OpenUSBByName(): call usb_close() if the
device can't be used
2005-07-04 Ludovic Rousseau
* [r1570] src/ifdhandler.c: IFDHControl(): having a NULL RxBuffer
is not an error since it is enough
to send the code in dwControlCode
Thanks to Martin Paljak for the patch
* [r1569] src/ccid_usb.c: OpenUSBByName(): vendorID, productID are
unsigned
avoids a "comparison between signed and unsigned" warning
* [r1568] src/ccid.h: struct _ccid_descriptor: dwMaxDataRate is
unsigned
avoids a "comparison between signed and unsigned" warning
* [r1567] src/ccid.h: struct _ccid_descriptor:
dwMaxCCIDMessageLength is unsigned
avoids a "comparison between signed and unsigned" warning
* [r1566] src/commands.c: CmdPowerOn(): atr_len is unsigned
avoids a "comparison between signed and unsigned" warning
2005-06-16 Ludovic Rousseau
* [r1563] src/parse.c: parse wLcdLayout
* [r1562] src/parse.c: parse bClassEnveloppe
* [r1561] src/parse.c: pares bClassGetResponse
* [r1560] src/parse.c: parse dwSynchProtocols
2005-06-15 Ludovic Rousseau
* [r1559] src/ifdhandler.c: #include <PCSC/reader.h>
* [r1558] examples/scardcontrol.c: remove definition of
SCARD_CTL_CODE and #include <PCSC/reader.h>
* [r1557] src/ccid_ifdhandler.h: remove definition of
SCARD_CTL_CODE
* [r1556] configure.in: check the availability of reader.h
(provided by pcsc-lite 1.2.9-beta8)
* [r1555] configure.in: check against pcsc-lite 1.2.9-beta8 instead
of beta7
2005-06-04 Ludovic Rousseau
* [r1547] src/ccid_usb.c: WriteUSB(): do not parse
usbDevice[reader_index].dev->bus if it is a
NULL pointer (the device has been removed for example)
2005-05-27 Ludovic Rousseau
* [r1546] README: Add Eutron SIM Pocket Combo and Eutron
CryptoIdentity in the supported
list
* [r1545] readers/CryptoIdentity.txt,
readers/supported_readers.txt: add Eutron CryptoIdentity
2005-05-20 Ludovic Rousseau
* [r1523] README: add Verisign Secure Token in the supported list
* [r1522] README: add RSA SecureID SID800 in the UNsupported list
* [r1521] README: add Verisign Secure Storage Token in the
supported list
* [r1520] readers/sid800.txt: regenerate using new ./parse
2005-05-05 Ludovic Rousseau
* [r1514] readers/Makefile.am, readers/SCR331-DI-NTTCom.txt: add
SCR331-DI-NTTCom.txt
* [r1513] readers/Makefile.am: rename KAAN_mIDentity.txt in
mIDentity.txt
* [r1512] readers/ACR38.txt, readers/CardMan3121.txt,
readers/GemPCKey.txt, readers/KAAN_Advanced.txt,
readers/KAAN_Base.txt, readers/LTC31.txt, readers/Oz776S.txt,
readers/SCR331-DI.txt, readers/SCR331.txt, readers/SCR3310.txt,
readers/SCR335.txt, readers/SIM_Pocket_Combo.txt,
readers/SPR532.txt, readers/mIDentity.txt: regenerate using the
latest src/parse program
* [r1511] src/ifdhandler.c: do not #include <math.h> since we now
use +1 instead of ceil() to round
the calculated timeouts to the upper integer
- we do not need an mathematical exact value. the
{usb,serial}read must
just not timeout before the reader firmware timeouts
- we avoid a dependency/link on the math library
* [r1510] src/ifdhandler.c: T0_card_timeout(): use intermediate
variables EGT, BWT, CWT, etu to
improve code readability
* [r1509] src/ifdhandler.c: T0_card_timeout(): declare EGT, WWT as
double instead of int to have
some precision
We also calculate EGT and WWT in milliseconds instead of seconds
2005-05-04 Ludovic Rousseau
* [r1508] README, readers/supported_readers.txt: add SCM Micro SCR
331-DI NTTCom in the "Should work but untested by me"
list
* [r1507] src/ifdhandler.c: IFDHCreateChannelByName(),
T0_card_timeout(), T1_card_timeout(): also
include other card parameters (TC1 for T=0, TC1 and CWI for T=1)
in the
timeout formula
* [r1506] README, readers/supported_readers.txt: rename "Kobil KAAN
mIDentity" in "Kobil mIDentity"
* [r1505] src/ifdhandler.c: IFDHICCPresence(): add support of
SCR331-DI NTTCom
Thanks to Takuto Matsuu fro the patch
* [r1504] src/ccid.h: #define SCR331DINTTCOM 0x04E65120
* [r1503] readers/supported_readers.txt: add the manufacturer name
in the reader name
2005-05-02 Ludovic Rousseau
* [r1496] src/ccid_serial.c: typo in the data rates list
* [r1495] src/ifdhandler.c: T0_card_timeout()/T1_card_timeout():
use ceil() to round the timeout
* [r1494] src/ccid.c, src/ccid.h: ccid_error(): function is (const
char *) instead of (char *) to avoid a
"warning: passing arg 4 of `ccid_error' discards qualifiers from
pointer
target type" using gcc 3.4
* [r1493] readers/CherryXX33.txt, readers/DellSCRK.txt,
readers/GemPC433_SL.txt, readers/GemPCTwin.txt,
readers/KAAN_SIM_III.txt: regenerate using the new parse command
* [r1492] src/commands.c: CmdEscape(): replay the command if we
receive STATUS_COMM_NAK
* [r1491] src/ccid_serial.c: ReadSerial(): if we get a NAK we
return STATUS_COMM_NAK to the above
layer to replay the command instead of just restarting the read
* [r1490] src/defs.h: add STATUS_COMM_NAK
* [r1489] src/parse.c: display the clock frequencies supported by
the reader
* [r1488] src/parse.c: move the display of supported data rates
after printing
bNumDataRatesSupported info
* [r1487] src/ifdhandler.c: IFDHSetProtocolParameters(): check if
the baud rate is present in the
baud rates list only if the list is present. Otherwise we use the
old
behavior.
* [r1486] src/ccid_usb.c: get_data_rates(): if the reader do not
support GET DATA RATES we return
NULL instead of a manually constructed/fake list
* [r1485] src/ccid_serial.c, src/ccid_usb.c: Open*ByName():
initialise dwMaxDataRate field
* [r1484] src/ccid.h: add dwMaxDataRate field (again)
* [r1483] src/ccid_usb.c: get_data_rates(): check that the reader
sends a DATA RATES list size
multiple of 4 othewise it is an error
* [r1482] src/parse.c: display the bit value of dwFeatures in the
text message
* [r1481] src/parse.c: test all the 4 bytes of dwFeatures against 0
and not just the first one
* [r1480] src/parse.c: do not display the list returned by GET DATA
RATES if the list size is
not a multiple of 4 (n % 4 != 0)
2005-04-27 Ludovic Rousseau
* [r1479] src/ccid_serial.c, src/ccid_usb.c: Open*ByName: do not
initialise the now disappeared .dwMaxDataRate field
* [r1478] src/ccid.h: _ccid_descriptor: remove the now useless
dwMaxDataRate field
* [r1477] src/ifdhandler.c: IFDHSetProtocolParameters(): we do not
check if (card_baudrate <=
ccid_desc->dwMaxDataRate) since find_baud_rate() will tell us if
the
speed is supported or not by the reader
* [r1476] src/ccid_usb.c: get_data_rates(): if the CCID command GET
DATA RATES is nto supported
the array of supported rates contains only the default and max
data
rates
* [r1475] src/ccid_usb.c: get_data_rates(): test if int_array is
NULL (and not buffer)
* [r1474] readers/Makefile.am: add the new or missing readers
* [r1473] configure.in: version 0.9.4
* [r1472] src/ccid_serial.c: OpenSerialByName(): inhibit the
Plug-n-Play string by setting the RTS
signal to low. Mainly useful for the GemPC Card (PCMCIA)
* [r1471] readers/Verisign_secure_storage_token.txt: Verisign
Secure Storage Token
* [r1470] readers/Verisign_secure_token.txt: Verisign Secure Token
(without mass memory)
* [r1469] readers/supported_readers.txt: add Verisign Secure Token
and VeriSign Secure Storage Token
* [r1468] src/parse.c: display the supported data rates using the
CCID command GET DATA RATES
* [r1467] src/ccid_usb.c: get_data_rates(): use the real interface
number instead of 0
* [r1460] src/ccid_usb.c: get_data_rates(): buffer argument of
usb_control_msg is (char *) and not
(unsigned char *)
* [r1459] src/ccid_usb.c: get_data_rates() returns an unsigned int
[] (not just int [])
* [r1458] src/ccid_serial.c: SerialDataRates[] is unsigned
2005-04-26 Ludovic Rousseau
* [r1454] src/openct/proto-t1.c: t1_xcv(): increase the read
timeout if the card sends and WTX request
* [r1453] src/ccid_serial.c, src/ccid_usb.c: use the calculated
read timeout instead of a fixed value
* [r1452] src/ifdhandler.c: calculate and store the read timeout
according to the card ATR instead
of using a fixed value of 60 seconds
* [r1451] src/ifdhandler.c: add T0_card_timeout() and
T1_card_timeout()
* [r1450] src/defs.h: /* Default communication read timeout in
seconds */
#define DEFAULT_COM_READ_TIMEOUT 2
* [r1449] src/ccid.h: struct _ccid_descriptor: add unsigned int
readTimeout field
* [r1448] src/ifdhandler.c: IFDHSetProtocolParameters(): only use a
data rate supported by the
reader in the PPS negociation, otherwise we stay at the default
speed.
* [r1447] src/ccid_serial.c: OpenSerialByName(): the reader does
not support the Get Data Rates CCID
function so the list of supported data rates is hard coded.
* [r1446] src/ccid_usb.c: OpenUSBByName(): get the list of data
rates the reader supports
See 3.7.3 Get Data Rates (page 25) from CCID spec 1.00
* [r1445] src/ccid.h: struct _ccid_descriptor: add unsigned int
*arrayOfSupportedDataRates field
* [r1444] src/ccid_serial.c: OpenSerialByName(): set card movement
notification in synchronous mde
* [r1443] configure.in: we need pcsc-lite 1.2.9-beta7 and not just
beta5 since we use the new
log API
* [r1442] src/ifdhandler.c: extra_egt(): rewrite the function
comment
* [r1441] src/ifdhandler.c: extra_egt(): reuse the same baud rate
calculation formula
* [r1440] src/ifdhandler.c: extra_egt(): change two if() in one
* [r1439] src/ifdhandler.c: change comments: TBi (i>2) is BWI/CWI
not BWI/BCI
2005-04-25 Ludovic Rousseau
* [r1438] src/ifdhandler.c: extra_egt(): some (bogus) cards require
an extra EGT but the ATR does
not say so. We try to detect the bogus cards and set TC1=2
* [r1437] src/ifdhandler.c: light code reformating
2005-04-22 Ludovic Rousseau
* [r1436] readers/supported_readers.txt: add Eutron SIM Pocket
Combo
2005-04-21 Ludovic Rousseau
* [r1427] src/openct/checksum.c, src/openct/checksum.h,
src/openct/proto-t1.h: #include <stdint.h> only if HAVE_STDINT_H
is defined.
Some old FreeBSD do not have stdint.h.
Thanks to Tilman Linneweh for the patch
2005-04-13 Ludovic Rousseau
* [r1426] readers/SIM_Pocket_Combo.txt: Eutron SIM Pocket Combo
(the reader is dual slot and is seen as two readers)
* [r1425] readers/sid800.txt: RSA SecurID SID800 Hardware
Authenticator
2005-04-12 Ludovic Rousseau
* [r1422] src/Info.plist: "Generic CCID reader" -> "Generic CCID
driver"
2005-03-17 Ludovic Rousseau
* [r1411] src/ccid.c: ccid_error(): use log_msg() instead of
debug_msg()
* [r1410] src/debug.c: change debug_msg() in log_msg() and add the
priority argument
same for debug_xxd() changed in log_xxd()
These functions are only used by the parse command and if the
driver is
not used with pcsclite
* [r1409] src/debug.h: use pcsclite debuglog.h header file and use
its Log?() macro instead of
debug_msg().
This adds color to the log messages because Log?() macros use
log_msg()
instead of the deprecated debug_msg() function.
* [r1408] src/ifdhandler.c: init_driver(): use DEBUG_INFO2()
instead of debug_msg()
* [r1407] src/tokenparser.l: add "%option nounput" to avoid the
compilation warning
"`yyunput' defined but not used"
* [r1406] src/towitoko/atr.c: ATR_GetDefaultProtocol(): the message
"no default protocol found in ATR.
Using T=0" is not CRITICAL but INFO only
* [r1405] configure.in: store & restore the value of LIBS around
the macro
AC_CHECK_LIB(pcsclite,...) to avoid adding an automatic
-lpcsclite to
LIBS
* [r1404] configure.in: do not check for SCardEstablishContext is
the user does NOT want to use
pcsc-lite (with --disable-pcsclite)
2005-03-14 Ludovic Rousseau
* [r1400] README: release 0.9.3
* [r1399] COPYING, README, src/ccid.c, src/ccid.h,
src/ccid_ifdhandler.h, src/ccid_serial.c, src/ccid_serial.h,
src/ccid_usb.c, src/ccid_usb.h, src/commands.c, src/commands.h,
src/debug.c, src/debug.h, src/defs.h, src/ifdhandler.c,
src/openct/checksum.h, src/openct/proto-t1.h, src/utils.c,
src/utils.h: change licence from GNU GPL to GNU LGPL
* [r1398] configure.in: version 0.9.3
2005-03-04 Ludovic Rousseau
* [r1397] readers/KAAN_SIM_III.txt, readers/mIDentity.txt: Add KAAN
SIM III and KAAN mIDentity
* [r1396] config.h.in: add HAVE_LIBPCSCLITE
* [r1395] configure.in: use $PCSC_LIBS instead of $PCSCLITE_LIBS
since we used
PKG_CHECK_MODULES(PCSC, ...)
* [r1394] README, readers/supported_readers.txt: add Kobil KAAN
mIDentity in supported reader list
* [r1393] README, readers/supported_readers.txt: add Kobil KAAN SIM
III in supported readers list
* [r1392] README, readers/supported_readers.txt: add SCR 3310
* [r1391] readers/SCR3310.txt: SCR3310
2005-02-28 Ludovic Rousseau
* [r1368] src/ifdhandler.c, src/towitoko/atr.c: use ATR_t instead
of ATR
* [r1367] src/towitoko/atr.h: rename ATR struct to ATR_t do not
conflict with ATR field defined by
PCSC/ifdhandler.h.
This allows compilation using tcc (Tiny C Compiler)
2005-02-27 Ludovic Rousseau
* [r1361] configure.in: check that we can link with libpcsclite
needed by
examples/scardcontrol.c
* [r1360] configure.in: exits with an error if usbdropdir is not
defined
* [r1359] configure.in: if /usr/local/lib/pkgconfig/libpcsclite.pc
exists (default pcsc-lite
configuration) we exit telling the user to use
PKG_CONFIG_PATH=/usr/local/lib/pkgconfig ./configure
* [r1358] configure.in: do not check for pkg-config since we can do
without it
2005-02-25 Ludovic Rousseau
* [r1356] readers/CardMan3121.txt, readers/CherryXX33.txt,
readers/CherryXX44.txt, readers/GemPC433_SL.txt,
readers/KAAN_Advanced.txt, readers/KAAN_Base.txt,
readers/SCR331-DI.txt, readers/SCR331.txt, readers/SCR335.txt,
readers/SPR532.txt: typo: correct ICC by CCID where needed
* [r1355] src/parse.c: typo: used "ICC" instead of "CCID"
* [r1354] src/ifdhandler.c: IFDHSetProtocolParameters(): return
immediately if the reader has the
bit CCID_CLASS_AUTO_PPS_PROP set since he will perform PPS and
SetParameters himself
* [r1353] src/ccid.h: #define CCID_CLASS_AUTO_PPS_PROP 0x00000040
* [r1352] src/ifdhandler.c: IFDHSetProtocolParameters(): calculate
the value of pps[2] (TA1) even if
CCID_CLASS_AUTO_PPS_CUR bit is set and no PPS will be generated
by the
driver since this value is also used later by the SetParameters()
* [r1351] src/ifdhandler.c: IFDHSetProtocolParameters(): use
"card_baudrate <= ccid_desc->dwMaxDataRate"
instead of "card_baudrate < ccid_desc->dwMaxDataRate" to not miss
the
maximum speed value
* [r1350] Makefile.am: we do not need to distribute mkinstalldirs
* [r1349] configure.in: define WITHOUT_PCSC=false when pcsclite
_is_ used
2005-02-23 Ludovic Rousseau
* [r1346] examples/scardcontrol.c: #include <sys/time.h> instead of
<time.h> to get correct definition of
struct timeval under Mac OS X
* [r1343] src/debug.c: if you use --disable-pcsclite and do _not_
want to see the logs sent to
stderr just #undef LOG_TO_STDERR
* [r1342] configure.in, src/Makefile.am: if --disable-pcsclite is
used we must link the library with debug.c
to provide debug_msg()
* [r1341] examples/Makefile.am: use @PCSC_CFLAGS@ and @PCSC_LIBS@
2005-02-21 Ludovic Rousseau
* [r1330] src/ccid_serial.c: OpenSerialByName(): use tx_buffer[] =
{ 0x02 } insead of "\x02" since we
want 1 byte only and not a null-terminated string
* [r1329] src/Makefile.am: use @PCSC_CFLAGS@
* [r1328] configure.in: use pkg-config(1) to find everything
related to pcsc-lite
if you installed pcsc-lite in /usr/local you may use
$ PKG_CONFIG_PATH=/usr/local/lib/pkgconfig ./configure
if you do not have pkg-config installed you may use
$ CFLAGS=-I/usr/local/include/PCSC ./configure
2005-02-20 Ludovic Rousseau
* [r1327] src/ccid_usb.c: add an "interface field" in _usbDevice.
This value is set in OpenUSB()
and used in CloseUSB().
The struct usb_device structure is half "corrupted" after the USB
device
is removed and we wanted to use it when when closing the driver
after a
reader removal. This caused a crash with libusb 0.1.10.
* [r1326] README: add Kobil KAAN Base & KAAN Advanced readers in
the supported list
* [r1325] src/ccid_usb.c: Bogus_firmwares[]: add Kobil KAAN Base &
KAAN Advanced readers
* [r1324] readers/supported_readers.txt: add Kobil KAAN Base & KAAN
Advanced readers
* [r1323] readers/KAAN_Advanced.txt, readers/KAAN_Base.txt:
firmware 0.37
2005-02-04 Ludovic Rousseau
* [r1322] readers/ACR38.txt: new firmware (but still with version
1.0) with the wMaxPacketSize bug removed
2005-02-02 Ludovic Rousseau
* [r1321] README: move the ACR 38 from Unsupported to Supported
list
2005-01-26 Ludovic Rousseau
* [r1319] readers/Makefile.am: add the new or missing readers
* [r1318] readers/CherryXX44.txt, readers/KAAN_Advanced.txt,
readers/KAAN_Base.txt: new readers descriptions
2005-01-20 Ludovic Rousseau
* [r1317] README: add Cherry XX44 keyboard (SmartBoard G83-6744)
* [r1316] readers/supported_readers.txt: add Cherry XX44
(SmartBoard G83-6744)
2005-01-13 Ludovic Rousseau
* [r1314] README: move the SCM Micro readers from unsupported to
supported list and
document how to upgrade the firmwares
Thanks to Torsten Maykranz for his support
* [r1313] readers/SCR335.txt: New model with firmware 5.14 (instead
of 4.16)
* [r1312] src/ccid_usb.c: Bogus_firmwares[]: the 3 SMC readers had
the same (cut-n-paste) USB
identification
* [r1311] src/commands.c: CmdXfrBlockCHAR_T0(): move a variable
declaration at the beginning of
the function since ISO C89 forbids mixed declarations and code
* [r1310] src/commands.c: SecurePIN(): proprietary command to add
the PIN code in the APDU without
any padding (this is not possible with the CCID specs).
Thanks to Martin Paljak for the patch.
* [r1309] src/ccid.h: define SPR532 USB identification
2005-01-11 Ludovic Rousseau
* [r1302] configure.in: typo: shat -> what
2005-01-09 Ludovic Rousseau
* [r1301] src/commands.c: SecurePIN(), CCID_Transmit(),
SetParameters(): check that the user
provided command is not too large (avoid a possible buffer
overflow)
* [r1300] examples/scardcontrol.c: The APDU now comes _after_ the
CCID structure as described the CCID
specifications.
* [r1299] src/commands.c: SecurePIN(): directly use the user buffer
passed instead of reversing
the APDU/CCID structure. It is now as described in the CCID
specifications.
Thanks to Martin Paljak. I was wrong.
2004-12-19 Ludovic Rousseau
* [r1298] src/ccid_usb.c: SPR 532 firmware previous to 5.04 is
bogus regarding min/max pin lengths
* [r1297] readers/SPR532.txt: update with firmware 5.04
2004-10-27 Ludovic Rousseau
* [r1292] src/ccid_serial.c: OpenSerialByName(): use %s instead of
%d for dev_name
2004-10-20 Ludovic Rousseau
* [r1290] examples/scardcontrol.c: set wPINMaxExtraDigit: set max
to 8 (instead of 4) to differentiate it
from min (set to 4)
* [r1289] examples/scardcontrol.c: in wPINMaxExtraDigit the bytes
order is max,min and not min,max.
The comments were wrong
2004-10-19 Ludovic Rousseau
* [r1288] readers/supported_readers.txt: add Oz776
* [r1287] src/Info.plist, src/ccid_ifdhandler.h, src/ccid_usb.c:
check firmware version to avoid firmwares with bugs. You can
still use a
bigus firmware by setting DRIVER_OPTION_USE_BOGUS_FIRMWARE in
Info.plist
* [r1286] src/commands.c, src/commands.h, src/openct/proto-t1.c,
src/towitoko/pps.c: Add support of character level communication
(CCID_CLASS_CHARACTER).
Thanks to Jeffrey Dai
2004-10-14 Ludovic Rousseau
* [r1285] readers/DellSCRK.txt: add idVendor & idProduct using the
new parse command
2004-10-07 Ludovic Rousseau
* [r1284] readers/Makefile.am: reorganize the list and add
Oz776S.txt
* [r1283] readers/Oz776S.txt: O2Micro Oz776S USB Hub smartcard
reader
* [r1282] readers/SCR331-DI.txt, readers/SCR335.txt,
readers/SPR532.txt: add idVendor & idProduct using the new parse
command
* [r1281] src/ccid_usb.c, src/ccid_usb.h: the first argument of
get_desc() is lun instead of channel and the
function uses LunToReaderIndex() to get the reader index
* [r1280] src/parse.c: use lun instead of channel as first argument
to get_desc() and use the
returned value to detect an error
* [r1279] readers/SCR331.txt: add idVendor & idProduct using the
new parse command
2004-10-06 Ludovic Rousseau
* [r1278] readers/ACR38.txt, readers/CardMan3121.txt,
readers/CherryXX33.txt, readers/DellSK-3106.txt,
readers/GemPC433_SL.txt, readers/GemPCKey.txt,
readers/GemPCTwin.txt, readers/LTC31.txt: add idVendor &
idProduct using the new parse command
* [r1277] src/parse.c: display idVendor and idProduct
* [r1276] src/parse.c: display USB bcdDevice field. Is it the
device firmware release?
* [r1275] src/parse.c: add support of "Character level exchange"
2004-10-04 Ludovic Rousseau
* [r1265] configure.in: do not redefine PKG_CONFIG_PATH when
checking the pcsc-lite version
since the variable is already defined a few lines above
2004-10-03 Ludovic Rousseau
* [r1263] examples/scardcontrol.c: add "THIS PROGRAM IS NOT
DESIGNED AS A TESTING TOOL!
2004-09-30 Ludovic Rousseau
* [r1261] src/ifdhandler.c: mask bStatus to get the ICC state since
bSatus may also indicate
an error in b6-b7
* [r1260] src/ccid.h: #define CCID_CLASS_CHARACTER
* [r1259] src/ccid.h: define OZ776 USB identification
* [r1258] src/ccid.h: define CCID_ICC_STATUS_MASK and status states
* [r1257] src/commands.c: CmdGetSlotStatus(): card absent or mute
is not an communication error
(even if the CCID command result indicates a command failure)
* [r1256] src/ccid_usb.c: get_ccid_usb_interface(): the O2Micro
OZ776S reader has a wrong USB
descriptor. The extra[] field is associated with the last
endpoint instead
of the main USB descriptor.
2004-09-29 Ludovic Rousseau
* [r1254] examples/Makefile.am, src/Makefile.am: use @AM_CPPFLAGS@
(defined by configure.in) instead of `pkg-config
libpcsclite --cflags` since PKG_CONFIG_PATH may not be correct
here
* [r1253] configure.in: define AM_CPPFLAGS=`pkg-config libpcsclite
--cflags` here since we also
defined/exported a "valid" PKG_CONFIG_PATH
* [r1252] src/Makefile.am: do not define parse_CFLAGS since
AM_CPPFLAGS is already defined with the
same value
* [r1251] configure.in: try to find pkg-config files in
/usr/local/lib/pkgconfig since pcsc-lite
installs them in this directory by default
2004-09-08 Ludovic Rousseau
* [r1228] src/ccid.c: ccid_open_hack(): do not use a null
terminated C string for the
TPDU->APDU switch command since the command is NOT a C string
* [r1227] src/commands.c: CmdPowerOn(): do not use a null
terminated C string for the EMV->ISO
switch command since the command is NOT a C string
* [r1226] src/commands.c: switch the Cherry xx33 reader in ISO mode
if power up in EMV mode fails.
Thanks to St�phane Durand for the bug report.
* [r1225] src/ccid.h: #define CHERRYXX33 0x046A0005
2004-09-03 Ludovic Rousseau
* [r1213] src/ifdhandler.c: IFDHSetProtocolParameters(): return the
result value of SetParameters()
in case of error instead of always IFD_COMMUNICATION_ERROR.
This will allow to return IFD_NOT_SUPPORTED in some cases and
avoid a
PTS negociation failure (and card ignored) in pcscd.
* [r1212] src/commands.c: SetParameters(): returns
IFD_NOT_SUPPORTED if the CCID error is "command
not supported".
2004-08-24 Ludovic Rousseau
* [r1196] src/ifdhandler.c: IFDHSetProtocolParameters(): the
bmTCCKST bits shall be _set_ not cleared
* [r1195] src/ifdhandler.c: IFDHSetProtocolParameters(): we shall
indicate the T=1 checksum used
(LRC/CRC) in the SetParameters() command
* [r1194] src/openct/proto-t1.c: t1_negociate_ifsd: the frame size
is 5 only for LRC checksum. The
correct size is (4 + t1->rc_bytes)
* [r1193] src/utils.c: ReleaseReaderIndex: return 0 since the
function is not void ()
2004-08-17 Ludovic Rousseau
* [r1189] src/Info.plist: use the official doctype, public and
system ids. Thanks to Ville Skytt�
and OpenCT
2004-08-15 Ludovic Rousseau
* [r1186] README: release 0.9.2
* [r1185] examples/Makefile.am, src/Makefile.am: use AM_CPPFLAGS =
`pkg-config libpcsclite --cflags`
* [r1184] config.h.in: no need to define HAVE_PCSC_IFDHANDLER_H
(the check section changed in
configure.in)
* [r1183] configure.in: use `pkg-config libpcsclite --cflags` to
locate ifdhandler.h and do not
use PCSC/ifdhandler.h but just ifdhandler.h
2004-08-10 Ludovic Rousseau
* [r1165] README: place the "Known problems" near the affected
reader and not in a
independent section for clarification
2004-08-06 Ludovic Rousseau
* [r1160] src/parse.c: try to IFDHCloseChannel() only if we opened
at least one reader
* [r1157] src/ccid.c: ccid_open_hack(): update the hack for the
SCR331-DI contactless now we
use multi-slots
* [r1156] src/ifdhandler.c: IFDHICCPresence(): periodic debug
message indicating the card presence/absence
* [r1155] src/ifdhandler.c: use a much cleaner way to check
presence of a contactless card with a
multislot SCR331-DI reader
* [r1154] src/ifdhandler.c: IFDHICCPresence(): call
get_ccid_descriptor() on reader_index instead of Lun
* [r1153] src/ifdhandler.c: FDHGetCapabilities() tag
TAG_IFD_SLOT_THREAD_SAFE: Can NOT talk to
multiple slots at the same time (at least until it is fully
validated)
* [r1152] src/ifdhandler.c:
IFDHCreateChannel()/IFDHCreateChannelByName(): if the OpenPort()
call
fails we ReleaseReaderIndex() and do not call ccid_open_hack()
* [r1151] src/ccid_usb.c: for multi-slots readers
IFDHCreateChannel*()/OpenUSB is called for each
slot. If we are opening a new slot of an already opened reader we
reuse
the same data (same libusb structures) and share the same pbSeq.
* [r1150] src/commands.c: use (*ccid_descriptor->pbSeq)++ instead
of ccid_descriptor->bSeq++
* [r1149] src/ccid_serial.c, src/ccid_usb.c: use pbSeq instead of
bSeq
* [r1148] src/ccid.h: replace "unsigned char bSeq" by "unsigned
char *pbSeq" so that two slots
of a same reader can share the same sequence number
* [r1147] src/ccid_serial.c: use a dynamic timeout when reading the
serial port.
The first timeout use when detecting the reader is 2 seconds to
not wait
too long if no reader is connected. Later timeouts are set to 1
minute
to allow long time APDU.
2004-08-04 Ludovic Rousseau
* [r1146] src/ccid.h, src/ccid_serial.c, src/ccid_usb.c,
src/ifdhandler.c: remove defaultFeatures management (was used for
SCR331-DI hack)
* [r1145] src/Makefile.am: add "parse_CFLAGS = `pkg-config
libpcsclite --cflags`" so that parse.c
can find and use <ifdhandler.h>
* [r1144] src/parse.c: do not use OpenUSB/CloseUSB but
IFDHCreateChannel/IFDHCloseChannel to
use the ReaderIndex[] mechanism
* [r1143] src/utils.c: update copyright date (add 2004)
* [r1142] src/utils.c: LunToReaderIndex(): debug message when Lun
is not found
* [r1141] src/utils.c: GetNewReaderIndex(): debug message when
ReaderIndex[] is full
* [r1140] src/utils.c: GetNewReaderIndex(): store Lun in the first
free ReaderIndex[] entry
* [r1139] src/towitoko/pps.c: typo: Receivig -> Receiving
* [r1138] src/towitoko/pps.c: PPS_Exchange(): do not recalculate
the PPS length from the received PPS
but take it from the number of bytes actually received (it may
not be
a PPS)
2004-07-28 Ludovic Rousseau
* [r1107] src/ifdhandler.c: use reader_index instead of lun as
reader identification
allocate (in IFDHCreateChannel*) and release (in
IFDHCloseChannel)
* [r1106] src/ccid.c, src/ccid.h, src/ccid_ifdhandler.h,
src/ccid_serial.c, src/ccid_serial.h, src/ccid_usb.c,
src/ccid_usb.h, src/commands.c, src/commands.h: use reader_index
instead of lun as reader identification
* [r1105] src/utils.c, src/utils.h: use a more complex Lun ->
reader transformation
(Lun>>16) is not usable for multi-slots readers
2004-07-27 Ludovic Rousseau
* [r1103] src/openct/proto-t1.c: this code fails EMV test 1771-4
(should be a residue)
2004-07-26 Ludovic Rousseau
* [r1102] src/openct/proto-t1.c: - debug some cases
- add ISO 7816-3 rule number in comments
* [r1101] src/ccid_serial.c, src/ccid_usb.c: initialise
ccid.defaultFeatures field
2004-07-22 Ludovic Rousseau
* [r1096] configure.in: use pkg-config to test the release version
of pcsc-lite
2004-07-21 Ludovic Rousseau
* [r1095] configure.in: version 0.9.2
* [r1094] src/ifdhandler.c: hack to support the SCR331-DI
contactless interface
* [r1093] src/ccid.c: ccid_open_hack(): detect and activate the
contactless interface of the
SCR331-DI
* [r1092] src/commands.c: use bCurrentSlotIndex as the slot number
in the CCID commands (instead of 0)
* [r1091] src/ccid_serial.c, src/ccid_usb.c: initialise
bMaxSlotIndex and ccid.bCurrentSlotIndex fields
* [r1090] src/ccid.h: add defaultFeatures field for multislot
readers with different
dwFeatures for each slot.
* [r1089] src/ccid.h: add SCR331DI identification
* [r1088] src/ccid.h: add bMaxSlotIndex and bCurrentSlotIndex
fields to support multislot
readers (one USB device with two or more card readers)
2004-07-20 Ludovic Rousseau
* [r1087] src/openct/proto-t1.c: remove "|| sent_length" in "if
(retries == 0 || sent_length)" since it
is an OpenCT code that should not be needed with the new
automata.
* [r1086] src/openct/proto-t1.c: update the copyright, add my name
to reflect the same change in OpenCT
2004-07-19 Ludovic Rousseau
* [r1085] src/ifdhandler.c: update IFDHControl() prototype to
replace LPVOID by PUCHAR (prototype
changed in pcsc-lite-1.2.9-beta5)
* [r1084] src/ifdhandler.c, src/openct/proto-t1.c,
src/openct/proto-t1.h: BUG: I forgot to initialise the t1.lun
field. It failed to work with
more than one readers and a T=1 card in a TPDU reader.
* [r1083] src/openct/proto-t1.c: in resync: we set retries = 1
since when we return in the loop we have
retries--;
Without this retries goes negative and the test 'if (retries ==
0)' will
not become true again before a looooong time.
2004-07-16 Ludovic Rousseau
* [r1079] src/ccid_usb.c: OpenUSBByName(): use base 0 instead of 16
in strtoul() so that you can
express the decimal value 15 as: 15 (decimal), 0xF (hex) or 017
(octal).
It is not really needed since the reader descriptions in
Info.plist are
all in hex.
* [r1078] src/ifdhandler.c: init_driver(): use base 0 instead of 16
in strtoul() so that you can
express the decimal value 15 as: 15 (decimal), 0xF (hex) or 017
(octal)
* [r1077] src/ccid_ifdhandler.h, src/ccid_serial.c, src/ccid_usb.c,
src/ifdhandler.c, src/parse.c, src/utils.c: rename
PCSCLITE_MAX_READERS in CCID_DRIVER_MAX_READERS
This value is not defined by pcsc-lite but is internal to the
CCID
driver. By default pcsc-lite supports the same number of readers
(16).
* [r1076] src/commands.c: BUG: CmdPowerOn(): use memmove() instead
of memcpy() to copy the ATR
bytes since the source end destination buffers (with a more than
10
bytes long ATR) overlaps.
Bug spotted by splint http://www.splint.org/
2004-07-15 Ludovic Rousseau
* [r1075] src/openct/proto-t1.h: use "uint8_t *" instead of
"unsigned char *" in the prototype of
t1_state_t.checksum field.
* [r1074] src/tokenparser.l: initialise pcDesiredKey to NULL
instead of 0
* [r1073] src/commands.c: BUG in CmdXfrBlockTPDU_T1(): the
t1_transceive() returned value was
stored in an unsigned int and tested if < 0 (error case). Of
course the
test was never true.
* [r1071] src/openct/proto-t1.c: remove a useless break; after a
goto;
* [r1070] src/openct/proto-t1.c, src/openct/proto-t1.h: in
t1_transceive() and t1_negociate_ifsd() dad argument is unsigned.
* [r1069] src/openct/checksum.h: replace "unsigned char *" by
"uint8_t *" to use the exact same prototype as in
the functions definition
* [r1068] src/commands.c, src/commands.h: i2dw() is not used
outside commands.c so declare it static
* [r1067] examples/scardcontrol.c: allow splint to continue parsing
after use of type fd_set
* [r1066] src/commands.c, src/commands.h: CmdXfrBlockTPDU_T0() and
CmdXfrBlockTPDU_T1() are internal functions so
declare them static
* [r1065] src/towitoko/atr.c: atr tables are internal only so
declare them static
* [r1064] src/openct/proto-t1.c: define internal functions as
static
* [r1063] src/openct/buffer.c, src/openct/buffer.h: remove unused
functions
2004-07-10 Ludovic Rousseau
* [r1062] src/openct/proto-t1.c: change "previous_block[1]" in
"previous_block[PCB]"
* [r1061] src/openct/proto-t1.c: remove unused struct
ifd_protocol_ops
* [r1060] src/openct/proto-t1.c, src/openct/proto-t1.h:
IFD_PROTOCOL_MORE -> IFD_PROTOCOL_T1_MORE
IFD_PROTOCOL_STATE -> IFD_PROTOCOL_T1_STATE
renamed to be in line with OpenCT
2004-07-09 Ludovic Rousseau
* [r1059] examples/scardcontrol.c, src/ifdhandler.c, src/parse.c:
explicitely cast the returned value as (void) if we don't use it
* [r1058] src/ifdhandler.c: IFDHSetProtocolParameters(): test the
return value of SetParameters()
* [r1057] src/parse.c: ccid_parse_interface_descriptor() is now
static
* [r1056] src/parse.c: make channel variable (unsigned int) instead
of (int)
* [r1055] src/parse.c: include <sys/types.h> so splint can parse
the file
* [r1054] src/ccid_serial.c, src/ccid_usb.c, src/ccid_usb.h: mark
potentially null values as /*@null@*/ for splint
* [r1053] src/ccid_serial.c, src/ccid_usb.c, src/ifdhandler.c,
src/openct/proto-t1.c, src/parse.c: mark unused arguments as
/*@unused@*/ for splint
* [r1052] src/ccid_usb.c: include <sys/types.h> so splint can parse
the file
* [r1051] src/ccid.c: the buffer var_text[] was, in fact, used
outside its declaration
* [r1050] src/ccid_serial.c, src/ccid_serial.h: ReadChunk() and
get_bytes() are internal use in ccid_serial.c so declare
them static
* [r1049] src/ccid_serial.c, src/ccid_usb.c: lun is (unsigned int)
so reader = LunToReaderIndex(lun) is also (unsigned int)
* [r1048] src/ccid_serial.c: OpenSerialByName(): arguments of
CmdEscape() are unsigned
* [r1047] src/ccid_serial.c: replace "121234" by "123456" to make
it more clear it is a memory reservation
for 6 characters
* [r1046] src/ccid_serial.c: remove a unneeded cast in (int)lun
* [r1045] src/ccid_serial.c: allow splint to continue parsing after
use of type fd_set
* [r1044] src/ccid_serial.c: ReadSerial(): the unknown card
movement byte is in "c" not "buffer[3]"
* [r1043] src/ccid.c, src/ccid.h, src/ccid_ifdhandler.h,
src/ccid_serial.c, src/ccid_serial.h, src/ccid_usb.c,
src/ccid_usb.h, src/commands.c, src/commands.h, src/ifdhandler.c:
lun is (unsigned int) instead of (int)
Avoid a warning by splint in #define LunToReaderIndex(Lun)
(Lun>>16)
Left operand of >> may be negative (int): lun >> 16
2004-07-02 Ludovic Rousseau
* [r1023] src/Info.plist, src/create_Info_plist.pl: replace VENDOR
pattern by MAGIC_VENDOR since we also have a VENDOR in
IOCTL_SMARTCARD_VENDOR_IFD_EXCHANGE and then a collision.
same change for PRODUCT and FRIENDLYNAME to be homogenous.
* [r1022] src/ccid_serial.c: OpenSerialByName(): perform a command
(get the reader firmware) to be
sure a GemPC Twin (serial or pcmcia) reader is connected
* [r1021] src/openct/README: present where the files come from and
what I did
2004-07-01 Ludovic Rousseau
* [r1019] configure.in: version 0.9.1
* [r1018] README: release 0.9.1
* [r1017] src/openct/proto-t1.h: #define IFD_PARITY_ERROR
* [r1015] README: release 0.9.0
2004-06-30 Ludovic Rousseau
* [r1014] examples/scardcontrol.c: correct a signedness issue
* [r1013] src, src/.cvsignore: rename tokenparser_macosx.? in
tokenparser_fake.?
* [r1012] ., .cvsignore: add build-stamp and configure-stamp
* [r1011] examples, examples/.cvsignore: ignore temporary files
* [r1010] src/towitoko/COPYING: LGPL licence
* [r1009] configure.in: version 0.9.0
* [r1008] src/towitoko/pps.c: PPS_Match() was wrong when the
confirmation is shorter than the request
* [r1007] src/towitoko/pps.c, src/towitoko/pps.h: PPS_Exchange()
has a new argument (unsigned char *pps1) which is the
PPS1 returned by the card (TA1 the card wants to use)
* [r1006] src/towitoko/pps.c: CCID_Transmit() now uses a 4th
argument (unsigned char bBWI)
* [r1005] src/towitoko/pps.c, src/towitoko/pps.h: move macros
PPS_HAS_PPS?() from pps.c to pps.h
* [r1004] src/towitoko/atr.c, src/towitoko/atr.h: add
ATR_GetDefaultProtocol() function
* [r1003] src/towitoko/atr.c, src/towitoko/atr.h: remove unused
functions
* [r1002] src/towitoko/atr.c: the atr_f_table[] and atr_d_table[]
tables were partly wrong
* [r1001] src/towitoko/README: - update the text
- the function ATR_GetDefaultProtocol() is mine (Ludovic
Rousseau)
* [r1000] src/towitoko/defines.h: remove MIN() and MAX()
definitions
* [r999] src/ifdhandler.c: if DEBUG_LEVEL_PERIODIC is not set we
temporaily remove DEBUG_LEVEL_COMM in
IFDHICCPresence() to avoid having the low level debug every time
pcscd
test the card presence
* [r998] src/ifdhandler.c: - removed CardUp() and CardDown()
- all the reader initialisation/negotiation is now done in
IFDHSetProtocolParameters() (that's why you need
pcsc-lite-1.2.9beta3)
* [r997] src/utils.c: pcsclite.h moved in PCSC/
* [r996] src/defs.h: the t1 field in struct CCID_DESC changed from
Protocol_T1 (towitiko) to
t1_state_t (openct)
* [r995] src/debug.h: we do not need to have PACKAGE defined (I do
not remember what it was
used for)
* [r994] src/commands.c: CmdXfrBlockTPDU_T1(): use the T=1 TPDU
layer from opensc/ instead of towitoko/
* [r993] src/commands.c: CCID_Receive() returns IFD_PARITY_ERROR if
the error returned by the
reader is 0xFD (parity error) and IFD_COMMUNICATION_ERROR
otherwise (so
that the T=1 TPDU layer can recover the error)
* [r992] src/commands.c, src/commands.h: CCID_Transmit() now has a
new "unsigned char bBWI" argument
* [r991] src/commands.c: CmdPowerOn(): add a mechanism to allow
power on at 1.8V, 3V and then 5V
as specified by ISO 7816. We still use 5V for now to avoid
problems with
non ISO compliant cards
* [r990] src/commands.c: add __FUNCTION__ as argument to
ccid_error()
* [r989] src/ccid.c, src/ccid.h: ccid_error() now also has a "char
*function" argument to log the name of
the function in which the error occured
* [r988] src/Makefile.am: - rename protocol_t1/ in towitoko/ to
reflect the project the code comes from
- remove the now useless files from towitoko/ and add the files
from openct/
* [r987] src/towitoko/apdu.h, src/towitoko/protocol_t1.c,
src/towitoko/protocol_t1.h, src/towitoko/t1_block.c,
src/towitoko/t1_block.h: remove these files since I now use the
T=1 TPDU code from OpenCT
* [r986] src/openct, src/openct/LICENSE, src/openct/buffer.c,
src/openct/buffer.h, src/openct/checksum.c,
src/openct/checksum.h, src/openct/proto-t1.c,
src/openct/proto-t1.h: use T=1 TPDU code from the OpenCT project
<http://www.opensc.org/>
The state automata was greatly improved to manage "all" the
possible
errors cases.
* [r985] src/Info.plist: document the possible values for
ifdLogLevel and ifdDriverOptions
2004-06-23 Ludovic Rousseau
* [r972] examples/scardcontrol.c: - send Select DF and Select EF
APDU before Verify PIN
- read stdin (consume the "*" fake keys) if the pinpad is on a
keyboard
* [r971] configure.in: check for the presence of PCSC/ifdhandler.h
instead of ifdhandler.h
* [r970] config.h.in: HAVE_IFDHANDLER_H is renamed
HAVE_PCSC_IFDHANDLER_H
* [r969] README: add info for:
- Cherry XX33 keyboard
- Dell keyboard SK-3106
- Dell smart card reader keyboard
Move some readers in "Unsupported or partly supported CCID
readers:"
- C3PO LTC31
- SCM Micro SCR 331
- SCM Micro SCR 335
- SCM Micro SPR 532
2004-06-22 Ludovic Rousseau
* [r966] Makefile.am: ChangeLog is not a .PHONY target but a real
file
2004-06-13 Ludovic Rousseau
* [r940] examples/scardcontrol.c: use SCARD_PROTOCOL_T0 |
SCARD_PROTOCOL_T1 instead of SCARD_PROTOCOL_ANY
since it is not defined in Micosoft PC/SC
2004-05-30 Ludovic Rousseau
* [r910] configure.in: use 'pkg-config libpcsclite
--variable=usbdropdir' even if --prefix= is
used. You should use --enable-usbdropdir= and
--enable-ccidtwindir= to
set to different values.
2004-05-26 Ludovic Rousseau
* [r906] readers/DellSK-3106.txt: Dell keyboard SK-3106
* [r905] src/commands.c: set *rx_length to 0 when a ReadPort()
error is returned.
The problem was not solved by ccid_usb.c 1.25.
* [r904] src/commands.c: bPINOperation is not passed in the user
command since the command is
"PIN Verification" and nothing else
* [r903] examples/scardcontrol.c: remove useless bPINOperation
2004-05-25 Ludovic Rousseau
* [r900] examples/scardcontrol.c, src/ccid.h, src/ccid_serial.c,
src/ccid_usb.c, src/ifdhandler.c: add support for
SCardGetAttrib(.., IOCTL_SMARTCARD_VENDOR_VERIFY_PIN, ..)
to know if the reader supports SCardControl(..,
IOCTL_SMARTCARD_VENDOR_VERIFY_PIN, ..)
* [r896] configure.in: add a --enable-pcsclite option (default yes)
so that the driver can be
compiled for a different framework (one needing tokenparser.l)
* [r895] src/ccid_usb.c: set length to 0 when a usb_bulk_read()
error is returned
* [r894] src/Makefile.am: install Info.plist before the lib. This
is for my convenience only
because of my debug setup.
* [r893] src/Makefile.am: rename tokenparser_macosx.l into
tokenparser_fake.l since it is not
MacOSX specific.
2004-05-24 Ludovic Rousseau
* [r892] examples/scardcontrol.c, src/ccid.c, src/ccid_serial.c,
src/ccid_serial.h, src/ccid_usb.c, src/ccid_usb.h,
src/commands.c, src/commands.h, src/debug.c, src/ifdhandler.c,
src/towitoko/atr.h, src/towitoko/protocol_t1.c: recompile using
gcc -pedantic and correct:
- some C++ syntax comments
- many signedness "problems"
* [r891] src/ccid_ifdhandler.h, src/commands.c, src/commands.h,
src/ifdhandler.c: add support for Secure PIN through
SCardControl() (see sample code in examples/)
* [r890] src/ccid.c: - add some missing error codes
- low error values indicate the byte in error in the CCID frame
* [r889] examples, examples/Makefile.am, examples/scardcontrol.c:
add examples for SCardControl IOCTL_SMARTCARD_VENDOR_IFD_EXCHANGE
and
IOCTL_SMARTCARD_VENDOR_VERIFY_PIN
* [r888] Makefile.am: add examples in SUBDIRS
* [r887] configure.in: remove -fno-common from CFLAGS since it
is(?) gcc specific
* [r886] readers/ACR38.txt, readers/supported_readers.txt: add
Advanced Card Systems ACR 38
* [r885] readers/CherryXX33.txt, readers/supported_readers.txt: add
Cherry XX33
2004-05-18 Ludovic Rousseau
* [r882] src/ifdhandler.c: in CardUp():SetParameters() the default
TA1 is 0x11
2004-05-17 Ludovic Rousseau
* [r881] src/Info.plist: add default ifdDriverOptions set to 0x0000
* [r880] src/ifdhandler.c: - add support of
IOCTL_SMARTCARD_VENDOR_IFD_EXCHANGE in IFDHControl()
- read ifdDriverOptions from Info.plist to limit the use of
IOCTL_SMARTCARD_VENDOR_IFD_EXCHANGE (idea from Peter Williams)
* [r879] src/ccid.c, src/commands.c: redefined CmdEscape() to pass
the CCID message instead of just a tag
* [r878] src/ccid_usb.c, src/ccid_usb.h: do not export
get_end_points() declaration and make the function static
* [r877] src/Makefile.am, src/ccid_ifdhandler.h, src/ccid_serial.c,
src/commands.h, src/defs.h, src/parse.c, src/towitoko/atr.c,
src/towitoko/defines.h, src/towitoko/protocol_t1.c, src/utils.c:
reorganize header files
* [r876] config.h.in, configure.in: check for pcsclite.h and
ifdhandler.h installed by recent pcsc-lite
* [r875] src/pcscdefines.h: types and definitions are now in
<pcsclite.h>, "defs.h" and "ccid_ifdhandler.h"
* [r874] src/winsmcrd.h: removed since pcsclite.h now defines
SCARD_ATTR_*
* [r873] src/ccid_ifdhandler.h: use the ifdhandler.h provided by
pcsc-lite so remove a lot of lines
2004-05-14 Ludovic Rousseau
* [r872] configure.in: check that pkg-config command is present
before using it
* [r871] INSTALL, configure.in: use `pkg-config libpcsclite
--variable=usbdropdir` so you do not have to
use --enable-usbdropdir=DIR or --enable-ccidtwindir=DIR even if
pcscd
does not use the default /usr/local/pcsc/drivers
2004-05-12 Ludovic Rousseau
* [r863] README: document the libusb bug on MacOS X with
unplug/replug in a different USB
socket
* [r862] INSTALL, README: move debug configuration from INSTALL to
README since it is dynamic now
* [r861] README: remove the "readers enumeration" part since this
problem is now solved
by pcsc-lite-1.2.9
* [r860] INSTALL: document the use of 'pkg-config libpcsclite
--variable=usbdropdir'
2004-05-10 Ludovic Rousseau
* [r840] src/ifdhandler.c: in IFDHPowerICC() IFD_POWER_DOWN is just
power down without a power up.
Changed to be compliant with IFD Handler specifications.
2004-05-07 Ludovic Rousseau
* [r837] src/towitoko/protocol_t1.c: in
Protocol_T1_Negociate_IFSD() rename sblock in block since the
same
variable is used for sent and received block.
This was not clear and was the source of reported bug [ #300707 ]
"Delete block before using it in t1_protocol.c" which is not a
bug in fact.
2004-05-06 Ludovic Rousseau
* [r836] INSTALL: add a "configuring the driver for the serial
reader (GemPC Twin)" part
2004-05-04 Ludovic Rousseau
* [r825] readers/Makefile.am: add DellSCRK.txt
* [r824] readers/DellSCRK.txt, readers/supported_readers.txt: add
Dell smart card reader keyboard
2004-04-19 Ludovic Rousseau
* [r808] src/Makefile.am: add winsmcrd.h in COMMON
* [r807] src/ifdhandler.c: reset ATR string (length = 0) when the
card is powered down or not present
* [r806] src/defs.h: typo in a comment
* [r805] src/winsmcrd.h: list of tags for SCardGetAttrib() like
SCARD_ATTR_ATR_STRING
* [r804] src/ifdhandler.c: add SCARD_ATTR_ATR_STRING in addition to
TAG_IFD_ATR in IFDHGetCapabilities()
2004-04-16 Ludovic Rousseau
* [r795] src/ifdhandler.c: new IFDHControl() API
* [r794] src/ccid_ifdhandler.h: use a new version from pcsc-lite
with support of the new IFDHControl() API
2004-04-08 Ludovic Rousseau
* [r781] src/ccid_usb.c: add support for the libusb naming scheme:
usb:%04x/%04x:libusb:%s
* [r780] readers/SK-3106.txt, readers/SPR532.txt: parse bPINSupport
field
* [r779] src/parse.c: parse bPINSupport field
2004-04-07 Ludovic Rousseau
* [r778] readers/Makefile.am: also distribute SK-3106.txt
2004-04-06 Ludovic Rousseau
* [r777] config.h.in, configure.in: remove --enable-debugcritical,
--enable-debuginfo,
--enable-debugperiodic and --enable-debugcomm options since the
log
level is now dynamically managed by ifdLogLevel in Info.plist
* [r776] src/Info.plist: define default ifdLogLevel at 3
(DEBUG_LEVEL_CRITICAL | DEBUG_LEVEL_INFO)
* [r775] src/debug.c: remove now useless #ifdef DEBUG
* [r774] src/ccid_serial.c, src/ccid_usb.c: add { } to avoid
ambiguities now that DEBUG_* are "if (x) y" constructions
* [r773] src/ifdhandler.c: during the first IFDHCreateChannel*()
init_debug() is called to read the
value of ifdLogLevel from the Info.plist
* [r772] src/debug.h: change the DEBUG_* macros from static
(compilation conditional) to
dynamic (if ())
* [r771] src/Makefile.am: debug.c is only needed by parse_SOURCES
not COMMON
* [r770] src/ifdhandler.c: do not return before
pthread_mutex_unlock() in IFDHCreateChannelByName()
* [r769] src/ifdhandler.c: also call ccid_open_hack() in
IFDHCreateChannelByName()
* [r768] src/ifdhandler.c: T=1 context is initialized in CardUp(),
not in IFDHCreateChannel()
* [r766] src/ifdhandler.c: revert to nearly previous version.
- IFD_POWER_DOWN is power down and power up (cold reset)
- IFD_RESET is power up (warm reset)
- IFD_POWER_UP is power up
2004-04-05 Ludovic Rousseau
* [r764] configure.in: version 0.4.2
* [r763] readers/SK-3106.txt, readers/supported_readers.txt: add
support for the Dell keyboard SK-3106
* [r762] src/ccid_usb.c: define ALLOW_PROPRIETARY_CLASS by default
Proprietary USB Class (0xFF) are (or are not) accepted
A proprietary class is used for devices released before the final
CCID
specifications were ready.
We should not have problems with non CCID devices becasue the
Manufacturer and Product ID are also used to identify the device
*/
2004-03-31 Ludovic Rousseau
* [r755] src/Makefile.am: use $(srcdir) instead of ".". Thanks to
Dr Russel Winder for the patch.
2004-03-30 Ludovic Rousseau
* [r738] src/ccid_usb.c: allow proprietary CCID Class byte but only
if ALLOW_PROPRIETARY_CLASS is
defined. You should know what you do. Only useful for pre-CCID
devices.
* [r737] src/parse.c: - use get_ccid_usb_interface() to also manage
USB composite devices (keyboards)
- continue parsing even if bDescriptorType == 0xFF (proprietary)
* [r736] src/ccid_usb.h: define get_ccid_usb_interface() only if
__USB_H__ is defined (usb.h included)
2004-03-23 Ludovic Rousseau
* [r723] reconf: move the "cp aclocal.m4 build/" after autoreconf
2004-03-22 Ludovic Rousseau
* [r722] reconf: cp aclocal.m4 build/
2004-03-18 Ludovic Rousseau
* [r716] src/ifdhandler.c: Reset action is power off and power on,
not just power on
2004-02-27 Ludovic Rousseau
* [r709] README: add C3PO LTC32, SCM Micro SCR 333 and C3PO
TLTC2USB in the list of
"Should work but untested by me" readers
* [r708] README: alphabetical reordering of readers
* [r707] readers/supported_readers.txt: add SCR 333
2004-02-24 Ludovic Rousseau
* [r706] Makefile.am: use a shorter Perl script to convert
generate/convert ChangeLog
2004-02-14 Ludovic Rousseau
* [r703] README: release 0.4.1
* [r702] configure.in: version 0.4.1
* [r701] readers/Makefile.am: distribute SCR331-DI.txt and
supported_readers.txt
* [r700] src/Makefile.am: disribute create_Info_plist.pl
2004-02-13 Ludovic Rousseau
* [r698] configure.in: version 0.4.0
* [r697] README: release 0.4.0
2004-02-12 Ludovic Rousseau
* [r696] src/ifdhandler.c: huge rework of CardUp()
* [r695] src/towitoko/protocol_t1.c: return with a error if the
received bloc in less than 4 bytes (T=0
error response for example)
* [r694] src/ccid_serial.c, src/ccid_usb.c: fill dwDefaultClock and
dwMaxDataRate according to the reader descriptor
* [r693] src/ccid.h: add dwDefaultClock and dwMaxDataRate fields
2004-02-11 Ludovic Rousseau
* [r692] src/ifdhandler.c: Perform PPS and IFSD only if the reader
does not do it automatically
* [r691] src/ccid.h: add CCID_CLASS_AUTO_BAUD and
CCID_CLASS_AUTO_IFSD
* [r690] src/towitoko/protocol_t1.c: add return code tests in
Protocol_T1_Negociate_IFSD()
* [r689] src/towitoko/pps.c, src/towitoko/pps.h: PPS_Exchange() now
uses 'int lun' instead of 'Protocol_T1 * t1'
* [r688] src/towitoko/protocol_t1.c: remove debug message
* [r687] src/ifdhandler.c: use Protocol_T1_Negociate_IFSD() in
CardUp()
* [r686] src/towitoko/protocol_t1.c, src/towitoko/protocol_t1.h:
add Protocol_T1_Negociate_IFSD()
* [r685] src/ccid.h: add CCID_CLASS_AUTO_CONF_ATR
2004-02-09 Ludovic Rousseau
* [r683] src/ccid_usb.c: first bSeq is 0 (even if 1 works ok)
* [r682] src/ccid_usb.c: usb_reset() the device before usb_close()
2004-02-05 Ludovic Rousseau
* [r677] README: add Silitek SK-3105 keyboard URL
2004-02-04 Ludovic Rousseau
* [r676] src/debug.h: DEBUG_COMM4 was named DEBUG_COMM3 due to
cut-n-paste
2004-02-03 Ludovic Rousseau
* [r673] src/ccid_ifdhandler.h, src/ifdhandler.c: add CardUp() and
CardDown() for PowerOn and PowerOff actions
* [r672] src/ccid.h, src/ccid_serial.c, src/ccid_usb.c: add
dwMaxIFSD field
* [r671] src/debug.h: add DEBUG_COMM3()
* [r670] src/towitoko/pps.c, src/towitoko/protocol_t1.c,
src/towitoko/t1_block.c: use my own debug routines
* [r669] readers/SCR331-DI.txt: new file
2004-02-02 Ludovic Rousseau
* [r668] src/towitoko/protocol_t1.c: do not restrict ifsc to
Towitoko
* [r667] src/towitoko/protocol_t1.c: remove PPS hack
* [r666] README: add SCR 331-DI in the "should work" list
* [r665] readers/supported_readers.txt, src/Info.plist,
src/Makefile.am, src/create_Info_plist.pl: use
create_Info_plist.pl to generate the installed Info.plist from an
Info.plist template and a list of supported readers.
2004-01-29 Ludovic Rousseau
* [r663] src/ifdhandler.c: removed useless function name in debug
messages since we use __FUNCTION__
* [r662] src/ccid_usb.c: - remove device_name[] from struct
_usbDevice
- use naming scheme usb:vendor/product
- simplify (a bit) the code
* [r661] src/ccid_usb.h, src/parse.c: remore *device_name[]
argument from get_desc()
* [r660] src/debug.h: add DEBUG_CRITICAL4
2004-01-27 Ludovic Rousseau
* [r659] src/commands.c: set received size to 0 in case of error in
CmdXfrBlockTPDU_T1
* [r658] src/commands.c: in case of error exits CCID_Receive()
without copying an nonexistent anwser
* [r655] src/ccid_usb.c: use DEBUG_CRITICAL2() instead of
DEBUG_CRITICAL()
* [r654] README: add the "Silitek SK-3105 keyboard" in the "Should
work but untested by
me" list
* [r653] ., .cvsignore, aclocal, aclocal/.cvsignore, build,
build/.cvsignore, readers, readers/.cvsignore: ignore some build
files
* [r652] src, src/.cvsignore, src/towitoko,
src/towitoko/.cvsignore: ignore some build files
* [r651] src/Info.plist: add Silitek SK-3105 keyboard
* [r650] src/ccid_usb.c, src/ccid_usb.h: add support of USB devices
with multiple interfaces (like the Silitek
SK-3105 keyboard)
* [r649] src/ccid_serial.c, src/ccid_serial.h, src/ccid_usb.c,
src/ccid_usb.h, src/defs.h, src/ifdhandler.c: add support of
IFDHCreateChannelByName
2004-01-22 Ludovic Rousseau
* [r641] src/Makefile.am: move rules for src/protocol_t1/ files in
src/Makefile.am to avoid
building a (problematic) static library
* [r640] src/towitoko/Makefile.am: removed since rules for
src/protocol_t1/ files are in src/Makefile.am
2004-01-15 Ludovic Rousseau
* [r620] src/towitoko/apdu.h: define APDU_Cmd and APDU_Rsp
* [r619] src/towitoko, src/towitoko/Makefile.am,
src/towitoko/README, src/towitoko/atr.c, src/towitoko/atr.h,
src/towitoko/defines.h, src/towitoko/pps.c, src/towitoko/pps.h,
src/towitoko/protocol_t1.c, src/towitoko/protocol_t1.h,
src/towitoko/t1_block.c, src/towitoko/t1_block.h: new files from
Carlos Prados towitoko-2.0.7 driver (with a bit of hacking)
* [r618] src/Makefile.am: build protocol_t1 library
* [r617] src/commands.c: add SetParameters() CCID command
* [r616] src/ifdhandler.c: add support of T=1 in TPDU mode
* [r615] src/defs.h: add CcidDesc.t1 field
* [r614] src/commands.c, src/commands.h: replace CmdXfrBlockTPDU()
by CmdXfrBlockTPDU_T0() and CmdXfrBlockTPDU_T1()
* [r613] src/commands.c: split CmdXfrBlockShortAPDU() in
CCID_Transmit() and CCID_Receive()
* [r612] src/ccid_serial.c, src/ccid_usb.c, src/ifdhandler.c: call
ccid_open_hack() in IFDHCreateChannel() instead of in each
OpenPort()
* [r611] src/ccid.c, src/commands.c, src/commands.h,
src/ifdhandler.c: use an (int *) instead of a PDWORD for
rx_length argument
* [r610] aclocal, aclocal/Makefile.am, aclocal/acx_pthread.m4: new
files. add definition of ACX_PTHREAD macro
* [r609] src/ccid_ifdhandler.h, src/ifdhandler.c: add
get_ccid_slot() function
* [r608] src/ccid_serial.c, src/ccid_usb.c, src/ifdhandler.c:
remove function name from debug message since __FUNCTION__ is now
used in
DEBUG_* macro definition
* [r607] src/Info.plist: add ActivCard
* [r606] README: created an "Should work but untested by me"
section and add SCM Micro
SPR 532 and ActivCard USB reader 2.0
2004-01-08 Ludovic Rousseau
* [r584] README: The crashes under MacOS X were not because of a
bug in libusb but because of
a bug in pcscd MacOS X hotplug.
2004-01-06 Ludovic Rousseau
* [r581] src/ccid_usb.c: the USB extra field length shall be
exactly 54 bytes to be CCID.
2004-01-05 Ludovic Rousseau
* [r580] src/debug.h: also print the function name (__FUNCTION__)
in the debug messages
* [r579] src/ccid_usb.c, src/parse.c: add a test on the USB extra
field length to avoid a crash and print an
error message. This occurs when the reader is _not_ CCID and the
CCID
driver is used (wrong Info.plist for example).
2003-12-19 Ludovic Rousseau
* [r578] INSTALL, src/Makefile.am: build but do not install the
serial ccidtwin driver by default since it
is useless on computers without a serial port or without this
reader for
example.
2003-12-16 Ludovic Rousseau
* [r570] src/ccid_usb.c: read and write timeouts are not symmetric.
write timout can be shorter
since the reader and card is not supposed to do anything before
receiving (write) a command.
2003-12-12 Ludovic Rousseau
* [r569] src/ifdhandler.c: return IFD_NOT_SUPPORTED instead of
IFD_SUCCESS in functions doing
nothing (yet) (IFDHSetCapabilities, IFDHSetProtocolParameters,
IFDHControl);
2003-12-11 Ludovic Rousseau
* [r568] src/ifdhandler.c: set the result buffer length to 0 in
IFDHControl()
2003-11-25 Ludovic Rousseau
* [r565] configure.in: do not try to find usb.h and other libusb
files if --disable-libusb is
used. Needed if you only want to build the serial driver. Thanks
to Niki
Waibel for the patch.
* [r564] INSTALL, configure.in, src/Makefile.am: add a
--enable-ccidtwindir argument to ./configure to specify the
serial GemPC Twin installation directory
* [r563] Makefile.am, config.h.in, configure.in, reconf,
src/ifdhandler.c: use a updated version of acx_pthread.m4 needed
for FreeBSD
2003-11-06 Ludovic Rousseau
* [r556] configure.in: check that the installed libusb implements
usb_get_string_simple()
2003-11-04 Ludovic Rousseau
* [r553] README: add SPR 532 in "Supported CCID readers" list
* [r552] README: release 0.3.2
* [r551] configure.in: version 0.3.2
* [r550] src/commands.c: comment out the automatic GET RESPONSE
part. I don't think it should be
in the driver. Maybe in pcscd instead?
2003-11-03 Ludovic Rousseau
* [r547] readers/Makefile.am: also distribute SPR532.txt
2003-11-01 Ludovic Rousseau
* [r545] Makefile.am: bootstrap is no more distributed (it is no
more in CVS either)
* [r544] src/Makefile.am: $(CCID_BUNDLE) is a directory so use 'rm
-r' in uninstall_ccid: target
2003-10-31 Ludovic Rousseau
* [r543] src/Makefile.am: modify the hack to compile under MacOSX.
* [r542] reconf: config.guess, config.sub, depcomp and ltmain.sh
are in build/ so removed
them there.
* [r541] create_distrib.sh: useless since we have a 'make dist'
rule
2003-10-29 Ludovic Rousseau
* [r531] src/Info.plist: add USB identification for SPR 532
* [r530] readers/SPR532.txt: add SPR 532 description even if it is
not a "real" CCID reader.
* [r529] src/parse.c: continue parsing even if bInterfaceSubClass
and bInterfaceProtocol are
unsupported. This may be the case with non "real" CCID readers.
* [r528] src/parse.c: do not exit if the InterfaceClass is 0xFF
(proprietary). It is the case
with old readers manufactured before the final release of the
CCID specs.
2003-10-28 Ludovic Rousseau
* [r525] src/ccid_usb.c: correctly use the device name in a debug
message instead of a not yet initialised field.
* [r524] bootstrap: removed since ./reconf is doing a correct job
* [r523] README: move LTC31 reader from unsupported to supported
reader list. It was my fault
since in used odd INS byte in my test applet and odd INS bytes
are
forbidden by ISO 7816-4 ch. 5.4.2 Instruction byte. Thanks to
Josep Mon�s
Teixidor for pointing the problem.
* [r522] src/commands.c: correct a stupid bug that occurs with an
APDU with 2 bytes response.
2003-09-23 Ludovic Rousseau
* [r467] README: release 0.3.1
* [r466] MANIFEST: update file list
* [r465] README: add a note about T=1 cards and readers in TPDU
mode
2003-09-22 Ludovic Rousseau
* [r464] src/ccid_ifdhandler.h: define TAG_IFD_THREAD_SAFE
introduced in pcsclite-1.2.0-rc3
* [r463] src/ifdhandler.c: add support of thread safe (APDU
multiplexing on different readers)
* [r462] src/ccid_serial.c: ReadChunk() realy reads up to
min_length bytes. Add some debug messages
in the state automata.
* [r461] src/Makefile.am: modify install rules so that root can use
them even over NFS where root is
nobody
* [r460] config.h.in, configure.in: add --enable-multi-thread for
thread safe support
* [r459] Makefile.am, reconf: add reconf file
2003-09-19 Ludovic Rousseau
* [r453] src/ccid_serial.c, src/ccid_serial.h: complete
reimplementation of the Twin serial protocol using a finite
state automata (code much simpler)
2003-09-16 Ludovic Rousseau
* [r448] configure.in: Put back AC_PROG_CPP, it has nothing to do
with C++ but with C preprocessor
* [r445] src/ccid.c: Do not switch to APDU mode since it also
swicth in EMV mode and may not
work with non EMV cards
* [r444] src/Makefile.am: honor DESTDIR in install rules (closes [
#300110 ])
* [r443] configure.in: remove useless AC_PROG_CPP (no C++ code in
ccid driver)
* [r438] configure.in: version 0.3.1
* [r437] INSTALL: document the use of --enable-libusb=PATH
* [r436] configure.in: add --enable-libusb=PATH option
2003-09-10 Ludovic Rousseau
* [r425] README: I forgot to add "support of "time request" from
the card."
* [r423] README: release 0.3.0
* [r422] INSTALL: document the use of ./configure script
* [r421] Makefile.am: use ChangeLog instead of ChangeLog.cvs since
the dist Makefile target is
looking at this file name.
* [r420] src/config.h: config.h is now generated by ./configure
* [r418] Makefile.am, configure.in, readers/Makefile.am: add
readers/ in generated .tar.gz archive
* [r417] readers/CardMan3121.txt, readers/GemPC433_SL.txt,
readers/GemPCKey.txt, readers/GemPCTwin.txt, readers/LTC31.txt,
readers/SCR331.txt, readers/SCR335.txt: use new parse indentation
for more readability of supported features
* [r415] config.h.in: new build process using autoconf/automake
* [r414] src/ccid_serial.c, src/ccid_serial.h: manage serial
protocol used by the GemPC Twin. Thanks to Niki W. Waibel
for a working prototype.
* [r413] src/ccid.c, src/ccid.h: contains common CCID feature for
USB and serial (was in ccid_usb before)
* [r412] src/reader.conf.in: used to generate a correct reader.conf
with the real library name
* [r411] src/ccid_ifdhandler.h: remove IFDSetEmv() definition. It
is now useless.
* [r410] src/ifdhandler.c: use OpenPort instead of OpenUSB. move
the complex TPDU management in
commands.c (and use it only if reader does not support APDU mode)
* [r409] src/defs.h: transport abstraction: define OpenPort,
ClosePort, etc. to OpenSerial or
OpenUSB depending on TWIN_SERIAL compilation option
* [r408] src/debug.h: test for PACKAGE and not __CONFIG_H__ since
the config.h file is not
generated by ./configure
* [r407] src/commands.c, src/commands.h: - support auto voltage at
power on if reader support it
- support Gemplus proprietary command to switch reader from TPDU
to APDU mode
- use APDU mode if reader support it. make it easy to support
extended
APDU but I have no reader to test this.
* [r406] src/ccid_usb.c, src/ccid_usb.h: redesign to separate
communication media and CCID protocol. call
ccid_open_hack() upon open to do some reader dependent magic.
* [r405] src/parse.c: indent the output with one feature per line
(and not on the same line
separated by ,)
* [r404] Makefile, src/Makefile, src/check, src/ylwrap: new build
process using autoconf/automake
* [r403] src/pcscdefines.h, src/utils.c: use PCSCLITE_MAX_READERS
instead of PCSCLITE_MAX_CHANNELS
* [r402] Makefile.am, NEWS, bootstrap, build, build/ylwrap,
configure.in, src/Makefile.am: new build process using
autoconf/automake
2003-08-27 Ludovic Rousseau
* [r343] MANIFEST, src/Makefile, src/capabilities.c: remove unused
capabilities.c file
2003-08-26 Ludovic Rousseau
* [r342] README: release 0.2.0
* [r341] create_distrib.sh: script to create the .tar.gz
* [r340] README: add a note about libusb problem under *BSD
* [r339] src/check: require pcsc-lite 1.2.0 instead of 1.1.2
* [r326] README: the reader enumeration problem also exist under
GNU/Linux (is not MacOS
specific)
2003-08-24 Ludovic Rousseau
* [r322] MANIFEST: remove src/dep_stamp
* [r321] README: add not about bugs/limitations under MacOS X
2003-08-21 Ludovic Rousseau
* [r314] src/parse.c: do not print garbage if we can't get the
iManufacturer or iProduct fields
2003-08-20 Ludovic Rousseau
* [r309] src/config.h: comment low level debug messages
* [r308] src/Makefile: use ./ylwrap instead of ylwrap
* [r306] src/check: do not define LDFLAGS since we get it from
outside
* [r305] src/Makefile: add needed MacOS X frameworks to LDFLAGS
(for parse and check)
* [r304] MANIFEST: add src/ylwrap
* [r303] src/ylwrap: wrapper to call (f)lex
* [r302] MANIFEST: src/parse shall not be distributed
* [r301] src/ccid_usb.c: do not duplicate the Info.plist filename
but "calculate" it once
* [r300] src/Makefile: Add support of MacOS X
* [r299] src/Info.plist: use an <array></array> for the alias
enumeration
2003-08-14 Ludovic Rousseau
* [r279] src/ccid_usb.c: use a 1 minute USB timeout instead of the
1 second used for debug
* [r278] MANIFEST: include in CVS
* [r277] src/Makefile: remove parse binary in clean target
2003-08-13 Ludovic Rousseau
* [r276] src/Makefile: do not exit with failure if makedepend(1)
does not exist
* [r275] INSTALL: Installation and check guide
2003-08-12 Ludovic Rousseau
* [r273] README: release 0.1.0
* [r269] ., AUTHORS, COPYING, Makefile, README, readers,
readers/CardMan3121.txt, readers/GemPC433_SL.txt,
readers/GemPCKey.txt, readers/GemPCTwin.txt, readers/LTC31.txt,
readers/SCR331.txt, readers/SCR335.txt, src, src/.dependencies,
src/Info.plist, src/Makefile, src/capabilities.c,
src/ccid_ifdhandler.h, src/ccid_usb.c, src/ccid_usb.h, src/check,
src/commands.c, src/commands.h, src/config.h, src/debug.c,
src/debug.h, src/defs.h, src/ifdhandler.c, src/parse.c,
src/parser.h, src/pcscdefines.h, src/tokenparser.l, src/utils.c,
src/utils.h: Initial revision